Web Loader Problem - ABA DSS

**3405gdw** · July 3rd, 2008

I have never been able to use IE. I have used firefox. now when I put in the IP it just says can't connect to server. I have reset rec. and the dsl modem and the wireless router. I am using the netgear xe102's. a few weeks ago when i tried to check updates it just said don't turn off the rec. and it hung there forever until i had to turn it off. it never did this in the past. It always checked for updates. Now when I try to use firefox to load new bin, it won't find the ip that is listed in the menu/internet/first line ip address. anyone have any ideas? Thanks in advance.

Crow13 · July 3rd, 2008

Like I mentioned to others, you have to have the exact I.P on the menu under Internet/Network Info. on the top line. This is the N-Fusions I.P address, and you have to type it exactly. So write that down, put the N-Fusion on channel 100 and go to your computer. Then if you don't have Winrar go to Google and download the free 30day trial, it will unzip all files and especially the rar. files like 1.47. So do this then go to Internet Explorer and at the top browser line that starts with http: , type the I.P in that line and press Enter. A little window will pop up asking for your Username type (admin) then Password (0000) and click O.K., then the Webloader window will pop up. You will click on Open then click on the file you just downloaded and it will show up in the Webloader window then click Upload, the N-Fusion will shut down for 10-15sec. count this is normal. When the N/F comes back on go to System Settings and S/W Version and click on that and see if the 1.47 is there, if so you can do a Factory Default and then scan the antennas again and you should be good to go! Good luck and let me or anybody know if it worked and if you need more help.

greggy_t · July 3rd, 2008

hello, i'm trying to load the new file as well......i followed your instructions word for word and when i type the ip address in the explorer bar it says cannot find this webpage....what could be wrong???

**3405gdw** · July 3rd, 2008

I did this exactly as you stated. In IE i get page cannot be displayed. in Firefox i get can't connect to server. I have the files downloaded and uncompressed. I just can't get the computer to talk to the nfusion using the ip address. the last two numbers strart with 0's, so i leave those off. emu is off and autoroll is off. anymore ideas?

Crow13 · July 4th, 2008

O.k guys, I will talk to Matchstick and see what is going on. I used the Webloader flawlessly when 1.47 file first came out and no problem, I think maybe the site was overloaded. I will talk to him and let you know if he can fix it, I will let you all know.

**chill dawg** · July 4th, 2008

To all who can't load 147 bin via web loader you can load it using nfusion uploader via serial cable,

mrwonderful · July 4th, 2008

I'm having the same problem. When I enter the IP address IE can't find it but when I enter the gateway IP address the logon screen pops up but won't accept my logon name (admin) and password (0000). Any suggestions?

Bus3544 · July 4th, 2008

When I type the I.P. address into the explorer bar it tries to find it but ends up doing a search instead. I have Vista.

**tenzin** · July 4th, 2008

Quote:

Originally Posted by chill dawg

To all who can't load 147 bin via web loader you can load it using nfusion uploader via serial cable,

How can I do that? will you please tell me in details?

**Beefeater1** · July 4th, 2008

I found this statement from another site, it may help some with the web loader.

When I could not connect to the webloader I went into my router settings and reserved a DHCP client for my nfusion using the ip address. No issues using the webloader since and it seems to work on any channel.

Crow13 · July 4th, 2008

Tenzen, if you read above you I already explained how to use the Webloader!

**tenzin** · July 4th, 2008

Quote:

Originally Posted by Crow13

Like I mentioned to others, you have to have the exact I.P on the menu under Internet/Network Info. on the top line. This is the N-Fusions I.P address, and you have to type it exactly. So write that down, put the N-Fusion on channel 100 and go to your computer. Then if you don't have Winrar go to Google and download the free 30day trial, it will unzip all files and especially the rar. files like 1.47. So do this then go to Internet Explorer and at the top browser line that starts with http: , type the I.P in that line and press Enter. A little window will pop up asking for your Username type (admin) then Password (0000) and click O.K., then the Webloader window will pop up. You will click on Open then click on the file you just downloaded and it will show up in the Webloader window then click Upload, the N-Fusion will shut down for 10-15sec. count this is normal. When the N/F comes back on go to System Settings and S/W Version and click on that and see if the 1.47 is there, if so you can do a Factory Default and then scan the antennas again and you should be good to go! Good luck and let me or anybody know if it worked and if you need more help.

i did exactly what u've said but problem is that when i type IP add in search bar or browser it keeps saying "cannot find" . I put numbers and dots exactly how it shows in IP address but failed!

arichert3 · July 4th, 2008

Quote:

Originally Posted by tenzin

i did exactly what u've said but problem is that when i type IP add in search bar or browser it keeps saying "cannot find" . I put numbers and dots exactly how it shows in IP address but failed!

make sure you use the periods after every three numbers

**allen1977** · July 4th, 2008

i have loaded the 147 file and turned a/r off and emu off, still have no red light sayin im connected to server. the router im connected to shows that im connected via the ethernet cable. since loading this file i cant even get the box to work thru the a/r and emu...(which i have turnned off now while trying the iks) i have even tried rebooting the router and letting nfusion re-sink itself to it. i dunno anything else to try