"Revised Step By Step For Nfusion Webloader"

[Beefeater1]

I hope this c/p helps some folks here with problems regarding webloader issues.


First You may need to disable any search engines other than Windows I/E
or Firefox ( If you have you main search engine as Google or Yahoo it will default there and the webloader will not work , you may also have to go to the tools section of the exlporer and click tools- advanced settings- scroll down to where you see "search from address bar' and make sure it is set to "just go to most likely site " ) with the Nfusions remote go Menu-internet- network information , the first set of numbers ( Directly below the DCHP/Static settings ) will be your Nfusions IP write it down ( This is the Only set of Numbers the webloader will acknowledge ), exit out , put the Nfusion on Channel 100 for DN , 50 for B3V , type the Ip address into your Computers address bar , ( some have to type the whole Ip some have to eliminate the leading 0's) ( example - if your address is 192.168.001.002 you may have to enter 192.168.1.2 ) you should get the pop up users name is admin , password is 0000 , ( if you have set a password in the parential control settings then that is what you use here ) , webloader page should open , browse for the correct bin ( make sure you are loading the un-zipped bin The file must say Bianary document any other is not the correct bin ) , and hit upload , wait till unit has re-booted and either returns to channel or displays 0000 , do a factory default , re-enter all Satellite and users settings , re-scan one Satellite at a time , Make sure you have Internet connection , and watch TV ( Thanks to HumanNetWorks and radrik and many others for their contributions to this revised webloader step by step )
__________________

[jaycool]

Originally Posted by Beefeater1

I hope this c/p helps some folks here with problems regarding webloader issues.


First You may need to disable any search engines other than Windows I/E
or Firefox ( If you have you main search engine as Google or Yahoo it will default there and the webloader will not work , you may also have to go to the tools section of the exlporer and click tools- advanced settings- scroll down to where you see "search from address bar' and make sure it is set to "just go to most likely site " ) with the Nfusions remote go Menu-internet- network information , the first set of numbers ( Directly below the DCHP/Static settings ) will be your Nfusions IP write it down ( This is the Only set of Numbers the webloader will acknowledge ), exit out , put the Nfusion on Channel 100 for DN , 50 for B3V , type the Ip address into your Computers address bar , ( some have to type the whole Ip some have to eliminate the leading 0's) ( example - if your address is 192.168.001.002 you may have to enter 192.168.1.2 ) you should get the pop up users name is admin , password is 0000 , ( if you have set a password in the parential control settings then that is what you use here ) , webloader page should open , browse for the correct bin ( make sure you are loading the un-zipped bin The file must say Bianary document any other is not the correct bin ) , and hit upload , wait till unit has re-booted and either returns to channel or displays 0000 , do a factory default , re-enter all Satellite and users settings , re-scan one Satellite at a time , Make sure you have Internet connection , and watch TV ( Thanks to HumanNetWorks and radrik and many others for their contributions to this revised webloader step by step )
__________________

Whats the advantage to using the webloader over null modem cable?

[davidhop]

Originally Posted by jaycool

Whats the advantage to using the webloader over null modem cable?

you dont have to disconect your receiver. you do it via internet.