nfusion immediate fix

[SleepyTime76]

You mean the area between North and South Korea, and putting the IP address of your Nfusion in the DMZ cannot possibly have positive results.

[jaycool]

Originally Posted by garifo

I know it makes no sense...
I ran a couple of tests myself. I have 3 nfusion.
I did multiple reboots on the box when I saw this post last night....still no picture.
so I changed the IP on one box to 123 rebooted the box...I got picture.
I continue to reboot the other two boxes with no luck...
Rebooted my router & modem all boxes turned off from the back.
I changed my box to dhcp again...rebooted no picture again.
I changed the ip on one of my other boxes. Got picture. I know the change is only happening within the local network
but for whatever reason that did the trick. I went to bed last night around 10.30 pacific with no picture
on two of my boxes. Woke up this morning now all of the work.
Can't explain it.
It's possible that when u ran the test with the two boxes side by side the issue had already been fix therefor the change did not matter.

I have three nfusions and two was working perfect and the third was not, no red light but it did have an IP address, but did not work. I tried everything reboot, factory file, factory default etc still nothing. I did not think the solution changing to static and changing the last three letters
pertained to me. But after all other things failed I changed the ip to static changed numbers and bingo it works and has been for several hours. Thanks to all involved.

[chill dawg]

Originally Posted by jaycool

I have three nfusions and two was working perfect and the third was not, no red light but it did have an IP address, but did not work. I tried everything reboot, factory file, factory default etc still nothing. I did not think the solution changing to static and changing the last three letters
pertained to me. But after all other things failed I changed the ip to static changed numbers and bingo it works and has been for several hours. Thanks to all involved.

Interesting change it back to DHCP and post back with results!

[onekoolmutha]

thanks 123 worked for me also

[jaycool]

Originally Posted by chill dawg

Interesting change it back to DHCP and post back with results!

I changed it back to dhcp and Im still up the last three numbers is still to one I changed it to 123. You can not change the ip address unless you go to static. You are right; Very Interesting!

[bassist]

After going to static, I changed the last three numbers to 122 & instant TV. I left it on static for a couple of hours & observed no glitches, while I had a chance to observe.

Switched back to DHCP about 1/2 hour ago & it has run smooth so far.

Before switching the IP addy, there was no red light, though the internet connection was "on" in the internet menu.

[pchurch]

thanks for the info guy. It works on BEV.

[LePue43]

yea on mine i changed the last three digits and it went down in 15 mins. now i have to change just the last digit to anywhere from 0- 9 and it comes right back on for another 15 mins , but hay it works for until a real fix comes out

[billyboy460]

mines down no light need a real fix getting fustrated

[firouz]

Thank you i just tried it and it works for now i will see and reply later if it stops
thanks

[packrat]

werks for me too----123

[SleepyTime76]

Can someone please explain to me why this is working? Unless the government needs static IP's to systematically charge us all, this does not make any sense to me. If the IKS servers are down, how is it possible to get a signal?

[ninop]

a big thank you!

[wyboo51]

Originally Posted by odmillan

seriously guys, i don't know why very few people have done this. Our good friend kayjay recommended that you "just go to your internet setting and go from dhcp to static i.p and change the last 3 numbers to 123 and t.v should show up without a reboot it works for me....i even got sirius back." this is the easiest fix and the picture came back immediately!

working for 45 min here ,,works for me ,,thanks wyboo51