Attention nFusion owners ... Please READ - Page 3 - ABA DSS

**pchurch** · April 14th, 2009

Quote:

Originally Posted by johnnybluedawg

cant remember the post,,but one user said they got an old linksys router and used that ,,and turned it into a working wireless bridge,,so i have heard one successfull use of it

Here is the post you are looking for by OMEEWON:
http://www.abadss.com/forum/830-nfus...ing-wrong.html
Im using a Linksys Wireless B router. The way its connected: Clearwire, modem, connected with cat5 to Linksys Router, and nfusion connected with cat5 to Linksys. My laptop connected wireless to Linksys

I do have an Ip address and it is set to DHCP
Thanks for all ur help

TheRealRockGuy · April 14th, 2009

Quote:

Originally Posted by ghostyroasty

Anyone use DD-wrt??

I do. I also use tomato on my other router

oldrfguy · April 15th, 2009

Nfusion HD Nuvenio on Actiontec router Fios fibre network direct connect used fixed IP as it had dhcp issues until updated

edsvolvo · April 26th, 2009

I have a trendnet router and my box is not working at all.good signal , able to updated but nothing happens.I was working great before.

**Mojo** · May 8th, 2009

All the information above is great!!!!!

SHAWNLEE · May 8th, 2009

Is any1 having problems getting the xxx channels

**snakebite** · May 8th, 2009

Quote:

Originally Posted by SHAWNLEE

Is any1 having problems getting the xxx channels

you need to start your own post. the adult channels are gone.n3

whodathunk · May 20th, 2009

Nfusion HD - Linksys WRT54G Wireless with 4-port switch (not using it wireless - it is wired). We tried several routers with the Nfusion before we found one that worked with my cable company / modem combination. This one worked right out of the box. Hope this helps some other poor sap who's struggling with connection

Whodathunk

**rj4285** · May 20th, 2009

NFusion HD lynksis wrt310n Its wireless but I'm hardwired to the STB.

wileywench · July 16th, 2009

nfusion HD hardwired to Westell 327W

**jvarcol** · July 16th, 2009

Nf nuvenio sd prt(dsl) dmax4e2787

LenPer97 · July 16th, 2009

phoenix hardwired to a Buffalo router..

starick · July 22nd, 2009

Nuvenio HD hard wired with Linksys/Cisco WRT610N plus three (3) Novas to Linksys WRT610N with either Logiteck Playlink Bridge or Netgear Powerline adapters

Quote:

Originally Posted by creativegenius

Greetings All

I want to update the list of Routers that are known to work well with the Nfusion receivers.

So, what I'd like you to do is respond to this post like this:

nFusion Receiver Model Router Mfg, and Router Model

nFusion Nova Nova SMC Model WBR14-G.

nfusionSD LinkSys BEFSR41V.2

nfusionHD LinkSys BEFSR41V.2

Creative Genius

mellwood · July 22nd, 2009

hey guys i have solaris and i have 2wire gateway is that what u need to know and everything works great thanks to u guys

**niw18** · July 22nd, 2009

Phoenix ... Linksys WRT350N Wireless

**geno23** · July 22nd, 2009

nfusion solaris...D-link-DIR-615

**barry penasse** · July 22nd, 2009

Linksey WRTG54

my66ss · July 22nd, 2009

Tes Sat using nfusion nova download with a bell 2 wire router withlogitech wireless boxs

**crewchief31** · July 22nd, 2009

Linksys WRT160NV2 Nfusion phoenix & Solaris

LK1812 · July 22nd, 2009

I have a new Nfusion HD with ethernet over Airlink 101 Powerline adapters connecting to a Netgear FVG318 801.11g Wireless VPN Firewall router. My DHCP and DNS are furnished by my Windows Domain servers.

I previously had a Nfusion Nova working until Mid June with the the same equipment for about two years.