no local channels - ABA DSS

peeved · May 11th, 2008

Got my Captain 7100 USB up & running with the new bin. Reciever is hooked to Dish 500 with Dish-Pro Twin LNBF. Set to Satellites 119 & 110.
All channels work good but can't get local channels. Could dig some help.
Thanks

**arboristman** · May 13th, 2008

oh hey,sorry we missed there buddy.
what locals seem to be missing for ya buddy?
and what ya think of this stb? pretty cool uh! i really love this one.
probably my overall favorite one iv tested so far.

peeved · May 14th, 2008

I was digging the heck out of this receiver until I tried finding my local channels by doing a blind scan on the wrong sat. When I went to save the scanned channels the receiver locked up on channel 480. The actual channel playing on my TV is the Dish Network Information channel (channel 101). The channel on the receiver display window reads 480. The channel menu at the bottom of the TV screen reads 480. No buttons on the receiver work except the on/off switch. No comands from the remote control work except the on/off switch. Can't even adjust the volume with the remote or from buttons on receiver. I have powered on & off, disconnected the dish cable, powered on/off from switch on back of reciever. I tried reloading factory bin & new 728_bin with USB stick, tried reloading factory bin & new 728_bin with USB to RS232 cable. It will not let me download files in. It will not give any menus. Boot, reboot, power on/power off, nothing gives. I'm about ready to throw the Captain overboard. Thanks

**arboristman** · May 14th, 2008

ok.first,lets be sure of the small things.press the stb button on the remote and see if the receiver responds.

peeved · May 14th, 2008

Tried that, no response. Tried input select button, no response. Tried TV/STB button, no response. Tried SAT button, no response. Tried all & every combination I could think of, all with no response.

**arboristman** · May 14th, 2008

ok.thanx.
and when you go to load factory file with the loader and serial cable.you followed these instructions?

http://www.abadss.com/forum/851-capt...ial-cable.html

peeved · May 14th, 2008

Will try tomorrow & let you know what happens. Thank you

peeved · May 15th, 2008

Yes, followed instructions. Selected file to loader, turned on receiver & nothing. Did not get a download progress screen. The receiver refuses to accept anything. When receiver is turned on it goes into boot mode & displays 'boot' in window, then it displays 480. Thats it.

**arboristman** · May 15th, 2008

ok.try this one then buddy:

http://www.abadss.com/forum/852-capt..._fix_v120.html

peeved · May 16th, 2008

The v120 fix did not work either. Now what?

baron1 · May 16th, 2008

xxx on
110
119
91
posted this on wrong thread sorry.mod can delete

baron1 · May 16th, 2008

are the tps for your locals listed in sat list. rescan them seperately or add them if they are not there.locals are on spot beam. lyngsat will list spot beams and with tp goes with them.

Spot Beam and Coverage Maps

**arboristman** · May 16th, 2008

bummer.well we tried.
i had mine go to boot and stay there once too.i just loaded new file with loader/serial cable and she came out of it.
but anyway.it happens.and if you can't get her,no worries,she's backed up with 5 year warranty.

here ya go:

Welcom To Captain Inc.