CW700 - Slow Motion - ABA DSS

torresweb · August 3rd, 2009

Hi,

I have a CW700S here in south america, using 61-Amazonas. Some times my receiver is so slow, apparently it can't process fast image changes. The image looks like a slow motion. Have any of you experimented the same problem? What can I do to avoid it?

Best Regards,

**cdo_care** · August 4th, 2009

First off Welcome to ABAdss...

Sometimes the Hard reboot can fix the issue...

**painterguy14** · August 4th, 2009

Hello & Welcome to Aba!!!!!!! If a hard reboot doesn't work try doing a factory default all & reenter your setting & scan your channels again.

**asg** · August 4th, 2009

welcome to aba

**Victor Hugo** · August 4th, 2009

Quote:

Originally Posted by torresweb

Hi,

I have a CW700S here in south america, using 61-Amazonas. Some times my receiver is so slow, apparently it can't process fast image changes. The image looks like a slow motion. Have any of you experimented the same problem? What can I do to avoid it?

Best Regards,

To ABA family, enjoy your stay.

torresweb · August 4th, 2009

Quote:

Originally Posted by painterguy14

Hello & Welcome to Aba!!!!!!! If a hard reboot doesn't work try doing a factory default all & reenter your setting & scan your channels again.

Thank you!
Yes, I have tried it (I did this at least 3 times!!).
That behaviour happen mainly in premiere channels or in some specific program. Yesterday the receptor was so slow that froze when I tried change the channel.
I guest in some cases CW700S CPU keep overload deconding some kind of mpeg2 or unscrambling the signal... Is possible to see actual CPU utilization?

Best Regards,

**Biged** · August 4th, 2009

Welcome to the site all ways good to hear from a new member so pull up a chair kick your shoes off make your self at home and enjoy your stay with us

EHG · August 5th, 2009

Quote:

Originally Posted by torresweb

Thank you!
Yes, I have tried it (I did this at least 3 times!!).
That behaviour happen mainly in premiere channels or in some specific program. Yesterday the receptor was so slow that froze when I tried change the channel.
I guest in some cases CW700S CPU keep overload deconding some kind of mpeg2 or unscrambling the signal... Is possible to see actual CPU utilization?

Best Regards,

I don't believe you can monitor cpu or memory usage with the cw700s - However if while tuned to these stations that are causing you difficulty you press the info button on your remote you will be provided quite a bit of info including the tp that the station is on and the strength and quality of the signal amongst other things. Check to see if you are getting a reasonable signal from these tp's, if not perhaps you need to just tweek your dish a bit in order to fine tune your signal.

Let us know if this helped and if not perhaps someone else can find another possible solution. Good Luck

EHG · August 5th, 2009

My above post is based on the assumption that you have loaded 2.34 in your CW700s which was released a few days ago and is specifically an Amazonas fix for the CW700s

torresweb · August 6th, 2009

Quote:

Originally Posted by EHG

My above post is based on the assumption that you have loaded 2.34 in your CW700s which was released a few days ago and is specifically an Amazonas fix for the CW700s

Yes, I am using 2.34 with Amazonas only but the problem happened with early releases too. My signal is really good (always >= 75%.)

Thanks,

ovazquez · August 8th, 2009

I am using 2.34 with Amazonas in my CW 700 and I have scramble channels. I need help.