Need multi switch for HD

[robert123]

I am looking for multi switch that will work with my dish plus 1000 and 4 receivers including my newest panny 9200 for HD?

Thanks

[tomcat01]

i use the zinwell i love them here for 4 recievers

One of THE best available switches for FTA, read on!!! Works with dishpro lnb's, you only need to send ONE line per lnb, NOT two like dtv. Use dishpro AND dtv lnb's on the same switch! Dtv lnb's require two lines per lnb, so make sure you use DUAL directv lnb's with this switch. Send two satellites to four receivers with this one 4x4 multiswitch by Zinwell. Or, when using dishpro lnb's, send 4 satellites to four receivers. Your receiver must be able to have a 22k tone on or off, and also be able to select 13v or 18v on the lnb power(if using dishpro).


Also, use more than one switch to get more satellites. Get 8 satellites with dishpro lnb's or get 4 satellites with dtv when using two switches. (when using more than one switch, you need to run the outputs into a diseqc switch before going to the receiver)

• 4 x 4 Multi-Switch
• DTV Approved
• Excellent Isolation
• Super Compact Design
• Waterproof guaranteed

[tomcat01]

just make sure you read this properly .. there are other multiswitches .. out there

i am using the wb68
it is a 6x8 i have 4 line to different recievers all working great ..

[robert123]

Thanks tomcat. Ok I'm lil' confused. My dish pro has 3 lnb's and 3 cables coming out of it. How do I connect to the Zinwell 4x4 multiswitch? I see it has four inputs, one pair of sat a and another 22khz.

[Guto]

You need a dp44 switch four sat to four receivers that is why is called dp44...

[tomcat01]

yuo can also use a combiner and add the third sat for 6 bucks ..