Newbie w/ PanSat 9200 w/ 8psk - had picure, but no more...

[barney88]

Man!! I can't possibly be the only newb here w/ a No worky PanSat 9200



INFO:
Description of problem_ Scrambled or bad channel
Receiver Model_PanSat 9200 with 8psk installed
Software Version_pansat 9200 v9274
Diseqc Setting____ I am a lil' confused about this...
As I currently have the following satellites w/ a check mark in the antenna setup screen on the following channel

ECHO 1.2/Ku
LNB Type: Dish Pro
LNB Local Freq. : 11250
22KHz: OFF
DiSEqC: OFF
Legacy SW: None
Position Setting Diable
Tuner TypeL DVB-S / QPSK / OFF
TP: [1] 12224 v 20.000
Satellite Scan: ALL

ECHO 5/Ku
LNB Type: Dish Pro
LNB Local Freq. : 11250
22KHz: OFF
DiSEqC: OFF
Legacy SW: None
Position Setting Diable
Tuner TypeL DVB-S / QPSK / OFF
TP: [1] 12282 v 20.000
Satellite Scan: ALL

ECHO 9/T-13/Ku
LNB Type: Standard
LNB Local Freq. : 10750
22KHz: OFF
DiSEqC: OFF
Legacy SW: None
Position Setting Diable
Tuner TypeL DVB-S / QPSK / OFF
TP: [1] 11724 v 20.000
Satellite Scan: ALL

ECHO 7/Ku
LNB Type: Dish Pro
LNB Local Freq. : 11250
22KHz: OFF
DiSEqC: DiSEqC 1.0 (#1)
Legacy SW: None
Position Setting Diable
Tuner TypeL DVB-S / QPSK / OFF
TP: [1] 12225 v 20.000
Satellite Scan: ALL

Anik-F3/Ku
LNB Type: Universal 1
LNB Local Freq. : 9750 / 10600
22KHz: ---
DiSEqC: OFF
Legacy SW: None
Position Setting Diable
Tuner TypeL DVB-S / QPSK / OFF
TP: [1] 11715 v 20.000
Satellite Scan: ALL

ECHO 8.10/Ku
LNB Type: Dish Pro
LNB Local Freq. : 11250
22KHz: OFF
DiSEqC: DiSEqC 1.0 (# 2)
Legacy SW: None
Position Setting: Diable
Tuner Type: DVB-S / QPSK / OFF
TP: [1] 12225 v 20.000
Satellite Scan: ALL

ECHO 3/Ku
LNB Type: Dish Pro
LNB Local Freq. : 11250
22KHz: OFF
DiSEqC: OFF
Legacy SW: None
Position Setting: Diable
Tuner Type: DVB-S / QPSK / OFF
TP: [1] 12326 H 20.000
Satellite Scan: ALL

Nimiq 2/Ku
LNB Type: Dish Pro
LNB Local Freq. : 11250
22KHz: OFF
DiSEqC: DiSEqC 1.0 (# 1)
Legacy SW: None
Position Setting: Diable
Tuner Type: DVB-S / QPSK / OFF
TP: [1] 12239 H 20.000
Satellite Scan: ALL



Dish/dish's__It says DP Plus and Dish 1000 on the dish
Lnb/Lnb's________??___
Network/Satellite_____
What you have tried already__got the PanSat 9200 2 days ago. had problem to get it to work and all seems to work after the v9274 flash from last night. (But can't locate any channels that appears to be in High Def Channels). So this morning i tried to added a couple more satellites to scan. No, i don't what I am doing... and in between adding all the satellites as shown above, all my channels appears to be in blue "Scrambled or Bad Channel".

Can anyone help?? What did I do wrong??

Thanks!

barney

[SoDarkTheCon]

Have you been moving your dish to get all these other satellites...echo 7 tp should be 12239 and echo 8,10 should be 12224. Did you make sure your autoroll is on and did you actually give it time to kick in. Also try a hard reboot.

After further reading what you put. Make sure under the sat button on your remote, you click on dish package. That will make sure both echo 7 and 8,10 are active. make sure you fix the tp settings and you should have no problems.

[barney88]

Ha!!
When you say move... do you mean that I need to physically move (or pivot) the satellite dish??!! I have what was originally installed by the folks at DN and I am too new at this to get involve w/ moving / pivoting the dish (not a good idea for me, I will sure find a way to foul it it up

The autoroll / EMU settup Screen currently looks like this:

Keycode: ON
Dishnet Autoroll ON
BEV Autoroll: ON
GlobeCast Autoroll: ON

Do I need to turn any of the above "OFF" ??



okay... here is the dumbest thing..

I just reboot..... and IT WORKED!!!

Now, if I can only figured out how to find HD Channel....


Thanks,

Barney

[SoDarkTheCon]

Dude that reboot switch has saved a lot of headaches, and i always put that at the end.

[barney88]

Thanks SoDarkTheCon ...Man!! That was embarrasing...

Is my current setup correct for High Def?? How do find a high def channel?? Any ideas??!!

[SoDarkTheCon]

Originally Posted by barney88

Thanks SoDarkTheCon ...Man!! That was embarrasing...

Is my current setup correct for High Def?? How do find a high def channel?? Any ideas??!!

DISH Network -- Dish HD

Some channels may be added over time, so keep checking for updates.

[jc7257]

Most HD channels for Dik net are on Sat 129...

[barney88]

Originally Posted by jc7257

Most HD channels for Dik net are on Sat 129...

So which satellite is Sat 129 ??!!

[sly]

echo 9 is the sat, just make sure you have a dish pointing in that direction hehe. i did the same thing when i started took me about 2 days and a case to figure out what i was doing wrong would have been a day but the beer was to good haha. good luck and keep on testing oh i forgot what kind of a dish do you have? if it is a dish 500 then you will not get the hd stuff if it is a 1000 or better than you are good the dish will have to have 3 lnb's one for 110, one for 119, one for 129hd sat. later and again good luck

[barney88]

Originally Posted by sly

echo 9 is the sat, just make sure you have a dish pointing in that direction hehe. i did the same thing when i started took me about 2 days and a case to figure out what i was doing wrong would have been a day but the beer was to good haha. good luck and keep on testing oh i forgot what kind of a dish do you have? if it is a dish 500 then you will not get the hd stuff if it is a 1000 or better than you are good the dish will have to have 3 lnb's one for 110, one for 119, one for 129hd sat. later and again good luck

Thnx Sly,
I need some help on setting my Echo 9, can you tell me how do you have yours set up. I just scanned over and over and albeit I have 84% Signal and 99% Quality. I didn't find anything on Echo 9.

Please help...

Thanks,

Barney