[geojr]

my 7100 is acting weird, lost signal then goes to scramble mode, think were'er in for a rough ride,but I have no fear my new friends are here,also hello and i'm sure that biggie is going to be getting a lot of thanks in the near future, our newest mod.Hey you know what i wanna thank him right now for steping in with both feet,and running with the big dogs

[jc7257]

A hard re-boot with back toggle switch should get you fixed right up...

[geojr]

Hey jc thanks for the advice,

[jc7257]

Let us know if this gets you up and running...

[geojr]

yes sir jc that re-boot did just that no more problems,you guys are the best.

[jc7257]

Thanks for letting us know. Enjoy your TV, we are here to help...

[geojr]

well guess what after the re-boot i've found that it reacures,any suggestions?

[iknowcisco]

My 7100 does it too, sometimes 1-2 times an hour. Just part of the game, I 'spose. IMHO, those glitches are usually signs meaning an ECM is near.

[SatelliteJunkie]

Originally Posted by geojr

well guess what after the re-boot i've found that it reacures,any suggestions?

We are on borrowed time right now...way overdue for a hit.
But maybe they aren't going to do it now, due to the end being so near. lol (nagra2)

Were all getting a little lock up every once in a while...not so bad...and nothing a hard power reboot can't fix.

So the glitch you guys are noticing is normal and can't be fixed.
So we will just roll with the punches & see how it goes...

[Foodoop]

just a quick note, i went to coolsat site and saw they had a firmware fix for the lockup problem on the 8000 series but none of the rest...apparently that model was locking up to. i don't think it's anything other than shoddy circuitry or programming.
hopefully they will do a firmware update for the rest eventually. if you look at the clock time on front when you power it down you'll notice the time is frozen to.