ECM scramble again - ABA DSS

**bobneff** · March 24th, 2009

Man! You would think with our failing economy they would cut back on how often they ECM us? Must not cost much to do it.

**bigevil69** · March 24th, 2009

try a hard reboot with back switch

**cisco123** · March 24th, 2009

the 7100 is running smooth here buddy.do as bige says. try a hard reboot

**bobneff** · March 24th, 2009

did that, still scrambled, tried reloading 217, no luck. Weird, I've been motoring along fine with new code everytime it comes out for months?

**bobneff** · March 25th, 2009

it finally came on. Slow-mo autoroll I guess...

**geojr** · March 25th, 2009

see what i mean ,the above is a good example on how you get help ,from one of,the best places to get help and good sound advice!!!!!

infoisus · March 27th, 2009

Ive been getting scrambled since Thur. afternoon. Re-booting hasn't helped. Anyone else?

**creativegenius** · March 27th, 2009

What file do you have loaded?

Creative Genius

**geojr** · March 27th, 2009

my self creative i'v got 217

**geojr** · March 27th, 2009

217 0n my cs7100 and 204 on my cs5000

**creativegenius** · March 27th, 2009

The keys have just recently rolled, (visit Keys section to see the latest key data) and then ensure that you have autoroll enabled on your receiver.

Some uints may have been thrown for a loop. But it a bit early to tell yet ... the forum is NOT yet over populated by "Are We Down" posts yet

It seems of late that the CS units and the VS Plat are more prone to changes in the stream, kinda like an early warning system

(in my book at least) that's what I use to predict incoming ECM's

Creative Genius

**geojr** · March 27th, 2009

what is the key data and can you manually load them?

**creativegenius** · March 28th, 2009

Yes, you can ... but depending upon your receiver brand and model you might be able to find electronic versions called softcams. These get loaded just like any other file. And it beats entering them manually.

Creative Genius

**bobneff** · March 28th, 2009

Quote:

Originally Posted by creativegenius

The keys have just recently rolled, (visit Keys section to see the latest key data) and then ensure that you have autoroll enabled on your receiver.

Some uints may have been thrown for a loop. But it a bit early to tell yet ... the forum is NOT yet over populated by "Are We Down" posts yet

It seems of late that the CS units and the VS Plat are more prone to changes in the stream, kinda like an early warning system

(in my book at least) that's what I use to predict incoming ECM's

Creative Genius

Where is the keys section?

**bigevil69** · March 28th, 2009

there was an ecm thursday afternoon and there has been no bin released yet so just putting in the keys will not work