ABA DSS - Free to Air Satellite TV Community - View Single Post

**grasshopper** · May 6th, 2007

Stay connected to us - and get so much more - with the abadss.com Community Toolbar!
Click Here To Download Our Free Toolbar

Program your Coolsat 7000 PVR with the USB Stick:

1 - You need to format Memory stick. Using FAT32 to format it, not NTFS.
2 - Turn on your unit first then insert the USB stick
3 - Now you will see The Software Upgrade message.
4 - Hit the Red button on the left of the remote control to program it

How to setup your dish setting:

1 - Press Menu on the remote control
2 - Installation
3 - Highlight Dish Setting then Hit OK button
4 - Now it'll bring up the Sats list, you need to adjust LNB type, Frequency, DiseqC switch... to match with all your hardwares

How to scan the Channels:

There are two ways to do it:
1 - while you are at Dish Setting, highlight Channel Search then press OK.
1a - hit OK on Search Mode. Pick whichone you want to use==> Auto, Manual, Blind, Adv
1b - Highlight Start Search then Press OK. Beginning to scan...

2 - Menu ==> Installation ==> Channel Search. After this, follow steps 1a & 1b.

How to Renumbering your Local Channels:

1 - Menu ==> Installation
2 - Highlight Option then hit OK on the remote
3 - Hit Ok on Renumbering Local CH
4 - Pick your State & your City

Here are some bonus Pictures for you:

Check out our Sponsor for best deals
Coolsat | Viewsat | Sonicview

May 6th, 2007	#1 (permalink)
grasshopper Super Moderator Join Date: Apr 2005 Location: Far Far Away Posts: 7,446 Thanks: 468 Thanked 16,245 Times in 2,507 Posts Rep Power: 134	How to setup Coolsat 7000 PVR Stay connected to us - and get so much more - with the abadss.com Community Toolbar! Click Here To Download Our Free Toolbar Program your Coolsat 7000 PVR with the USB Stick: 1 - You need to format Memory stick. Using FAT32 to format it, not NTFS. 2 - Turn on your unit first then insert the USB stick 3 - Now you will see The Software Upgrade message. 4 - Hit the Red button on the left of the remote control to program it How to setup your dish setting: 1 - Press Menu on the remote control 2 - Installation 3 - Highlight Dish Setting then Hit OK button 4 - Now it'll bring up the Sats list, you need to adjust LNB type, Frequency, DiseqC switch... to match with all your hardwares How to scan the Channels: There are two ways to do it: 1 - while you are at Dish Setting, highlight Channel Search then press OK. 1a - hit OK on Search Mode. Pick whichone you want to use==> Auto, Manual, Blind, Adv 1b - Highlight Start Search then Press OK. Beginning to scan... 2 - Menu ==> Installation ==> Channel Search. After this, follow steps 1a & 1b. How to Renumbering your Local Channels: 1 - Menu ==> Installation 2 - Highlight Option then hit OK on the remote 3 - Hit Ok on Renumbering Local CH 4 - Pick your State & your City Here are some bonus Pictures for you: Check out our Sponsor for best deals Coolsat \| Viewsat \| Sonicview Last edited by grasshopper; January 20th, 2008 at 07:01 PM.