[Dim_Bos]

I have a Dishpro 500 with 2 lnbs, could scan Echostar7,9,8X and 1,2 but when I point to 3 (61.5) and run a blind scan catches all channels from either Echostar 7 or 8X.

What do i need to set my freq's other config to get INdian channels ?

[toe]

you have to make sure your switchres are correct in the dish install screen and you have to repoint your dish to 61.5 bird and do an autoscan

[just4ufolks]

Originally Posted by Dim_Bos

I have a Dishpro 500 with 2 lnbs, could scan Echostar7,9,8X and 1,2 but when I point to 3 (61.5) and run a blind scan catches all channels from either Echostar 7 or 8X.

What do i need to set my freq's other config to get INdian channels ?

Here is the link to the earlier post that will be useful for you to proceed in a meaningful manner:::...

http://www.abadss.com/forum/81-asian-fta/67437-need-help-getting-international-channels-like-b4u-zee-tv-setanta-sports.html

Explore n enjoy as you proceed to set ur reciever correctly..
Wish u gud n keep d forum posted with ur results as that will benefit others in similar situations....

Additionally there is a dedicated section for "INTERNATIONAL TV" n ASIAN CHANNELS...explore there as you go about ur project..

[tomcat01]

make sure you are on the right port .. wair untill you see 61.5 in the top right

[DishCharlie]

Originally Posted by Dim_Bos

I have a Dishpro 500 with 2 lnbs, could scan Echostar7,9,8X and 1,2 but when I point to 3 (61.5) and run a blind scan catches all channels from either Echostar 7 or 8X.

Originally Posted by Dim_Bos

What do i need to set my freq's other config to get INdian channels ?

If you really are aimed at 61.5W, you cannot get any channels from ES 7 or 8. If you are aimed at 110-119W, you cannot get any channels from ES3 61.5W or ES1,2 148W. It is possible to get misleading results by selecting the wrong satellite in the Installation Menu while the dish is aimed at the wrong sat.

Indian channels are on 61.5, 118.75 and 148. The sat at 118.75W AnikF3 will require a 30" dish with a special dual-band circular LNB (eg. CB2008a).

[Dim_Bos]

Thanks but sorry I mistated the dish, its not 500 its Dishpro superdish and yes I only get Echostar 7,8 and am not able to get any other satellite with any other combo.. I tried repointing my dish to 61.5 but didn't work.

How do i get my satellite to point to 61.5 or 118.75 and 148 , do i need to get another dish satellite to get point to these satellites ?