Fix for Bev EPG - ABA DSS

**carpenter1** · May 23rd, 2007

C/P

I fixed my own problem, I searched on Google and found the following solution, apparently the new bin file for the VS2000 Xtreme changes Nimiq 1,3 from 91.0W to 90.9W, which screws up getting the guide. In order to get the guide you need to change it back to 91.0W. To do this you need to go into the Antenna Settings and change the Motor Settings to USALS (even though you don't have a motor). Once you do that hit OK and then select Nimiq 1,3 (up arrow I believe), then hit the down arrow for West, then punch in the numbers 9, 1, 0 on the remote and hit OK to tell it to move to that position. Once its done, hit exit and save the settings. Exit the Antenna Settings menu and make sure to save if it asks you to. Then go back in to make sure that the Satellite now says Nimiq 1,3 91.0W. If it does, exit everything and go to the Vu2 channel.

Hit guide a couple times and your guide should be there now.

Thank you Theriex

**Satbum** · May 24th, 2007

Interesting - Almost worth hooking up my old Viewsat just to test this out.
};-)

**grasshopper** · May 24th, 2007

It's good to know. But I am testing this VS Xtreme right now and my guide comes up with out a problem

small1 · May 29th, 2007

hey thanks that worket i now have my guide back great info
Thanks again

sex9413 · June 30th, 2007

i got that problem also i fixed by myself somehow

**RICKSBEACH** · June 30th, 2007

Isn't it surprising how we can sometimes fix our own problems..

**jc7257** · June 30th, 2007

Quote:

Originally Posted by RICKSBEACH

Isn't it surprising how we can sometimes fix our own problems..

YEA, but Carps on the ball, he's into the research depatment now. I hereby announce Carpenter1 to be the President of our Research and Development Department...

**carpenter1** · June 30th, 2007

Quote:

Originally Posted by jc7257

YEA, but Carps on the ball, he's into the research depatment now. I hereby announce Carpenter1 to be the President of our Research and Development Department...

Oh hell no! I have no idea what I'm doing.
I'm still trying to dig my way out of the wet paper bag.

pipes_0 · February 4th, 2008

hey carpenter1 thanks so much for your help it got my unit to work now

**coorslightly** · February 4th, 2008

i didnt see this post, till now, i figured out that solution by fiddling with my remote. not for EPG but just to change the satellite number, when it changes by itself. 3 weeks ago.
ago.http://www.abadss.com/forum/306-view...te-number.html
i put a sticky in viewsat ultra section

abel08 · February 11th, 2008

how can i get bev working in my viewsat lite, its aimed on nimiq 82 the Sand Q good but says no audio no video ? why i always get nimiq 2 but not nimiq 1,3 ..i never use bev now i need it becose i dont have echo 110,119 anymore cose of hiding trees..
help please.....witch channels are better to use to check if i get the right dish direction ( i have dish 500 with 2 lnb ) thanks a lot guys..sorry i m new..

BOB233800 · February 11th, 2008

go a little to your right with your ant or use dish pointer

**arboristman** · February 11th, 2008

they haven't fixed this bug for nimiq 1 yet?

**bikerman2_98** · February 11th, 2008

Thanks ,I used used it to fix my ultra guide and now it works fine

**bikerman2_98** · February 11th, 2008

i was able to fix nimiq1,3 but there are a few channels i like on nimiq2 , i did the same as i did for nimiq1,3 but not sure of the the settings because i cant get and picture or sound or guide fot nimiq2 . can anyone tell me what settings to put in or what to do