Want to test dn/bel on one stb

[gatlinburgtrans]

Is there a thread or post that will help me setup and test both dn/bel on a viewsat lite.

[gatlinburgtrans]

here is a little more info

dishpro lnb and a single lnb both work. I have a disq switch supplied by viewsat . dishnet is locked but I cant seem to get signal on 91 bell.

[jc7257]

Get you another dual LNB and aim little lower for east coast and get 82 and 91. Use the sat loacator in newbies section. Hook diseq 119 to port 1, 110 to port 2, 91 to port 3, and 82 to port 4...

[tomcat01]

what hardware do you have eg: dish and lnbs you can add another lnb and hook into you switch and point at bev .. bev is the same height as dn110 but more west by about 3 inches .. then once you get it scan and let it roll and watch ..