Ultra won't autoroll

[twotiminlamb]

Can anyone tell me how to turn my autoroll on in my ulltra. Just got my box setup but it will not autoroll. Any help will be greatly appreciated....Thanks

[whiskars]

Turn he switch off in the back of the receiver. Then if pointed to B3V put it on channel 500 and let it sit. If pointed to DN put it on channel 200 and let it sit.

[twotiminlamb]

Do I turn the box to 200 and let it sit with the switch off or reset the switch and turn box to 200?

[Beefeater1]

Originally Posted by twotiminlamb

Can anyone tell me how to turn my autoroll on in my ulltra. Just got my box setup but it will not autoroll. Any help will be greatly appreciated....Thanks

Press menu - User settings then scroll to the right and press option 2... set auto roll to all.

Exit and then leave it on 200 on 119 - If your on b3v you can leave it on 218.

Let it roll until it kicks in.

[just4ufolks]

Originally Posted by twotiminlamb

Can anyone tell me how to turn my autoroll on in my ulltra. Just got my box setup but it will not autoroll. Any help will be greatly appreciated....Thanks

Here are the relevent settings for the ur ULTRA -assuming ur pointed to the SAT as in d info here..additionally ensure ur AUTO ROLL is set to ALL
in the user settings main menu...
dl currently working BIN nand park on a strong channel like cnn @ 2oo or speed @ 150...sud b gud to go...hope that helps ..let's know as u progress with ur efforts..


SATELLITE............Echo 8,10 110W
LNB POWER.........On
LNB TYPE.............Standard (OCS-DP if using DP LNBs)
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12224
DISEqC1.0..............Port 2
MOTOR..................Off
LEGACY SW..........None

SATELLITE............Echo 7 119W
LNB POWER.........On
LNB TYPE.............Standard (OCS-DP if using DP LNBs)
LNB FREQ.............11250
22KHz...................Off
TP FREQ...............12239
DISEqC1.0..............Port 1
MOTOR..................Off
LEGACY SW..........None

[twotiminlamb]

Thanks Just4u....I will verify my settings. I think my switch ports may be opposite of what you had on the settings. I will change the 119 to 1 and the 110 to 2 and give that a try as well. I did load the latest bin before I tried the box. However I guess I could try to load it again. As always.....I appreciate all the help. Thanks to all for the help...

[just4ufolks]

Originally Posted by twotiminlamb

Thanks Just4u....I will verify my settings. I think my switch ports may be opposite of what you had on the settings. I will change the 119 to 1 and the 110 to 2 and give that a try as well. I did load the latest bin before I tried the box. However I guess I could try to load it again. As always.....I appreciate all the help. Thanks to all for the help...

Hope you had a chance to reset and try things out - look fwd 2ur progress on ur project...gud day ....