setup

[bama1]

I will be setting up a new ultra lite for my brother-in-law tomorrow. It has been awhile since I set one up , do I get 110 locked in then adjust skew to get 119 or vice versa. Also he is using a lnb that is 2 built into 1 from d**h network, how will I know what to put in menu for lnb and how will I set up switch or will I use one. Sorry for all the questions ,It will save me alot of time if anyone has any ideas so I don't to play with it to see what works.

[storman666]

Originally Posted by bama1

I will be setting up a new ultra lite for my brother-in-law tomorrow. It has been awhile since I set one up , do I get 110 locked in then adjust skew to get 119 or vice versa. Also he is using a lnb that is 2 built into 1 from d**h network, how will I know what to put in menu for lnb and how will I set up switch or will I use one. Sorry for all the questions ,It will save me alot of time if anyone has any ideas so I don't to play with it to see what works.

es lock 110-skew 119,go to dishpointer.com for your coordinates,as for antenna settings,without knowing what lnb type,there is really no way of telling you your antenna settings,the lnb,it could be a legacy,dishpro,dishproplus?

[bama1]

thanks for the help.

[bama1]

Thr LNB says dishpro on it, is that the OSC DP that is in the guide. Also will I use a switch with this or does this have an internal switch.

[setofdoubles]

you don't need a switch, its built in. Just set your settings to OSC DP.

[setofdoubles]

Also make sure your 22k is off and on Disq 119 should be port 1 110 port 2.

[bama1]

all is good, thanks