ABA DSS - Free to Air Satellite TV Community - View Single Post

**grasshopper** · June 17th, 2007

Stay connected to us - and get so much more - with the abadss.com Community Toolbar!
Click Here To Download Our Free Toolbar

Thanks To SatBum

OK Folks - I know there are a lot of members that are curious to what the SV8000HD can do.

I have posted a link to some pictures that I took while testing my receiver. I have not made a overall review (yet) but each picture at this link will give you a little description of it.

All you need to do is click on the image and it will be enlarged for you.

I have included several different DN sats as well as BEV's.

There are also pictures of the 8PSK module and sub-board before , during , and after the install.

If you have any questions just post them here,

Open & Un-modded

Top View of Sub-board and 8PSK Module

Size comparison to the front of the receiver. Note the 5 each small screws and foam spacer. The foam spacer is used to support the module and sub-board asslembly inside the receiver and the screws are for the housing cover. ftaconcept.com

June 17th, 2007	#1 (permalink)
grasshopper Super Moderator Join Date: Apr 2005 Location: Far Far Away Posts: 7,446 Thanks: 468 Thanked 16,247 Times in 2,507 Posts Rep Power: 134	Sonicview 8000 HD Molude, setup, etc... Stay connected to us - and get so much more - with the abadss.com Community Toolbar! Click Here To Download Our Free Toolbar Thanks To SatBum OK Folks - I know there are a lot of members that are curious to what the SV8000HD can do. I have posted a link to some pictures that I took while testing my receiver. I have not made a overall review (yet) but each picture at this link will give you a little description of it. All you need to do is click on the image and it will be enlarged for you. I have included several different DN sats as well as BEV's. There are also pictures of the 8PSK module and sub-board before , during , and after the install. If you have any questions just post them here, Open & Un-modded Top View of Sub-board and 8PSK Module Size comparison to the front of the receiver. Note the 5 each small screws and foam spacer. The foam spacer is used to support the module and sub-board asslembly inside the receiver and the screws are for the housing cover. ftaconcept.com Last edited by grasshopper; January 20th, 2008 at 07:15 PM.