sv 360 hookup

[mooee]

bought new sv 360, I would like to now how to hook it up to the tv. i don't see lnb in or out.
coudn't bring up the menu on the tv. could you please post step by step how to hookup and download instructions, do I need a loader for the new bin?
thanks

mooee

[rajiv427]

Use your Audio and Video cable to hook it to your TV.

You can use a USB to download all the files.

Always read all the instruction before downloading any file for your receiver.

[bel71281]

here is how to setup and load http://www.abadss.com/forum/942-sv-3...ite-setup.html

here is the latest file http://www.abadss.com/forum/941-sv-3...-5-7-08-a.html

load via usb no loader required

you also need to be vip member to download files here, upgrade your membership.

[cribber]

Very good choice of reciever. Do some fancy reading so you can self educate yourself.
It might be daunting at the moment but since it is a hobby, you'll love it.

[mooee]

Originally Posted by rajiv427

Use your Audio and Video cable to hook it to your TV.

You can use a USB to download all the files.

Always read all the instruction before downloading any file for your receiver.

Thank you all very much for your fast response.
because the unit is new to the market there is few information about it.
The problem I am having is when I trun the unit on it only shows menu, and when I did hook the line coming from the dish to ifa out ifa nothing show on the tv screen, I have dish with 2 lnb, and switch only one line coming to the receiver is there a trick to the hook up!!!

thanks

mooee

[firstforme]

If you use the IF out your tv will need to be on channel 3 or 4 depending on the 3-4 switch on the back of the receiver on tuner 1. I like to use the RCA cables from the receiver red, white and yellow to the red, white and yellow on my TV aux and change the tv channel to aux. I hope this helps. Put your sat line on tuner 1 and in your installation menu tuner 1 will be shown at the top of the screen. When you are in the installation menu scroll to sat and push ok on the remote and it will list all sats and just hit OK when you get to the you are aimed at and set it up.

[mooee]

Originally Posted by firstforme

If you use the IF out your tv will need to be on channel 3 or 4 depending on the 3-4 switch on the back of the receiver on tuner 1. I like to use the RCA cables from the receiver red, white and yellow to the red, white and yellow on my TV aux and change the tv channel to aux. I hope this helps. Put your sat line on tuner 1 and in your installation menu tuner 1 will be shown at the top of the screen. When you are in the installation menu scroll to sat and push ok on the remote and it will list all sats and just hit OK when you get to the you are aimed at and set it up.

Thank you firstform
I tried ch 3 &4 with no success, it seem the receiver froze on menu, also nothing showing on tv screen

[firstforme]

Try to load the factory file and then load new bin again and set the box up. You can get the factory file from sonicviewusa site.

[mooee]

I tried everything you mentioned nothing happend. I downloaded factory bin then the new fix bin nothing happend.My question is when you hook the receiver to the tv a menu should come up true? so you can scroll down and follow the direction, however when i hook the receiver nothing happend and i don't know why!! what I am doing wrong, also when I turn the receiver on from the back it show boot then b then na in then 0000 is that normal? also when I press menu then ok then up&down nothing happend need your help regard this matter, also how to reformat or clear the receiver and the thunb drive.

Thank you very very much in advance.
Mooee

[firstforme]

Did you use bin 120b. The premier is also out and the new file for it is 108b. Give the bin number and also detailed instructions how you are connected from sat to box and box to tv.I tried the loop out to my dvd recorder and do not get a picture. I will try my sat settings and change tuner 1 to loop and see if that works. The more info you give us the easier it is for someone to help. Tell us what kind of sat (**** or b) if you are aimed at 10/19 and so on.

[firstforme]

You need to hook your line from your sat to the top post on tuner 1 (LNB IN) if you have only one line from your sat then you can put a line from tuner 1 out to tuner 2 in. Then in your sat menu have tuner 1 set to separate and tuner 2 set to loop. You have to use the RCA plugs either Y. Pb, Pr and connect to your tv if it has the same color and type input. If your TV does not the use the RCA plugs from yellow, red, white to the input on your tv red, yellow and white. I hooked mine up fast on Friday and this unit does not have vcr out like my CW and SV-4000. I was wrong when I told you about the 3/4 switch on the back. I hope this helps.