360 elite hooked up to superdish

[bryanh08]

I just received my new 360 elite and have a question. I have a superdish with 119 and 110 hooked up to a dp34 and the a cable from the dp34 to my stb. My question is can I use a dpp seperator at the back of stb with just the one cable coming from the dp34? I have been trying but so far unable to make it work.


My settings are



119/echo 7:
LNB type: DPP separator
LNB frequency: 11250
22khz.: off
LNB power: on
transponder : 12239

search options: all
network search: on
Diseqc : port 1
motor: disable
legacy switch: off


110/echo 8,x:
LNB type: DPP separator
LNB frequency: 11250
22khz.: off
LNB power: on
transponder : 12224

search options: all
network search: on
Diseqc : port 2
motor: disable
legacy switch: off

Tuner 2 settings are set the same as tuner 1. I get channels on 1 but not 2. Does anybody have any suggestions? Thanks for any help.

[bryanh08]

Here's an update. After trying a few different things this is what I ended up doing to get the duel channels to work. I took the dpp seperator off and hooked a cable up from loop out on tuner 1 to lnb in on tuner 2. Scanned tuner 1 using blind scan then used the channel copy to copy channels from tuner 1 to tuner 2. Everything's working great for now. Still need to check out ext hd setup.

[lonster]

Check this out..... http://www.abadss.com/forum/942-sv-3...able-dish.html