Screen went Black & White?

[roscoepm]

Hi,

I restarted my sv 360 elite a few times and I still have a B&W screen. Any sugustions?

Thanks

[cisco123]

need you to list your settings.and how you have it ran to your tv

[roscoepm]

hi,

It worked before today after I loaded the new bin file it went to B&W. The settings are the same as the ones you gave me few days ago. Thanks

well your pretty close lets see if we can get ya a little better.
list your settings for us like this clip and paste and modify.
and did ya let it sit on 200 for a few min.
Satellite 110 - Echostar 8,10 or (6,8)
LNB power----------- on
LNB Type------------ ocs-dp
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 2
Motor--------------- off
Legacy switch------- off
Satellite 119 - Echostar 7
LNB power----------- on
LNB Type-----------ocs-dp
LNB Freq------------- 11250
Transponder--------- 12239
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off
__________________

[cisco123]

if you have your tv on and your 360 on can you even see your menu?or anything

[roscoepm]

Yes, it's just all B&W

[cisco123]

in your tv settings make sure you are on the right av ports and check your cables

[bigevil69]

try this:while receiver in standby mode, press RED function key + 2+5+8+0. This will swith from PAL to NTSC and reverse. This is a new function with the latest release.

[roscoepm]

Hi,

I found the B@W problem. My s-video cable slid out a little. Sorry about that. My other problem now is that I get no channels. All of them say no information. On 119 E-7 the transponder won't stay on 12239. It switches to 12224 after I save it. Here are my settings. MY CONNECTION IS SEPARATE>>>>

Thanks
LNB power----------- on
LNB Type------------ ocs-dp
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 2
Motor--------------- off
Legacy switch------- off
Satellite 119 - Echostar 7
LNB power----------- on
LNB Type-----------ocs-dp
LNB Freq------------- 11250
Transponder--------- 12239
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off
__________________

[cisco123]

ok in your sat settings when you are on 119 and you put your tp on 12239 make sure it says 119 in the right hand corner same with 110 tp 12224

[cisco123]

and try to put it on dpseperator

[roscoepm]

Both were in the right hand corner. With the new settings 119 comes in fine. 110 does not.Also channel 200 is SLTV.

Thanks