SV360 Premier_V0119P Must be loaded on all new SV-360 Premiers

[arboristman]

SV360 Premier_V0119P Must be loaded on all new SV-360 Premiers
Hello everyone,

Please perform the follow step to clean out the system, and be able to update later fix on the way.(this will auto factory reset)

Please to do this you can only see menu correctly using composite (RCA) output, that is the Yellow, White & Red inputs.


=============================
SV360 Premier_V0119P clean syst files.
=============================


For USB Port loading:

1. Load new fixed V0119P and new 360 Premier SAT FILE 06-02-08.sat SAT File onto USB device
2.Press&Hold front panel OK button, at the same time switch read switch ON, Loading Menu will display.
3.Select new sat file and load
4.After load new sat file, select latest fixed and load
5.Reboot, setup and rescan


For Serial Port loading:

1. Turn OFF the Premier OFF completely
2. Connecting the Premier and PC with Null modem cable
3. Press&Hold front panel OK button, at the same time switch read switch ON, Loading Menu will display.
4. Open Loader 1.1
5. Click Connect to choose Com Port
6. Choose new 360 Premier SAT FILE 06-02-08.sat SAT File and let it update
7. After sat file update is done, repeat step 4-6 but this time choose SV360Premier_V0119P to update
8. When all update are done, do a power recycle (reboot)
9. Do setup and sat scan.

========================
========================

Ciao
SaCoDi

[basscat02]

Hey Arb. , I accidentally loaded the telefon file instead of 149 and I am dead in the water, Tried to reboot by using the loading instructions by holding down front button down and turning rear switch on and loadind the 3 files with a USB stick but no good. The null cable does not fit my pc.
Any ideas?
Thanks