Problem with dish500 setup - ABA DSS

**blondinchik** · August 30th, 2008

Hey guys
I have sv360 premier and 2 dishes 1st dish is dn500 with legasy lnb's on 110 and 119 second dish 31'' on galaxy 25 Both of them connected to diseqc 4x1 switch on port 1 for 31'' dish and port 3 for dn. I can see galaxy 25 and 110 but no 119 and i tried everything in setup with no luck.

my setup
110w
LNB power----------- on
LNB Type------------ single
LNB Freq------------- 11250
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 3
Motor--------------- off
Legacy switch------- sw21 lnb A

119w
LNB power----------- on
LNB Type------------ Single
LNB Freq------------- 11250
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 3
Motor--------------- off
Legacy switch------- sw21 lnb b

but in right upper corner with these settings still show 110w and I change every possible option and no luck

97w galaxy 25

LNB power----------- on
LNB Type------------ universal
LNB Freq------------- 10750
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off

I don't have any more options to try

jlsmoker · August 30th, 2008

Try shut off the DiseqC switch... on the 110 & 119

**jc7257** · August 30th, 2008

Change your LNB type in the setting to OCS-DP for both sats and define 119 to port 1 on diseq and 110 to port 2 on diseq. Put 97 on port 3 on diseq. Let us know...

**edwinsao** · August 30th, 2008

come on buddy post your feedback

**blondinchik** · August 30th, 2008

Thank you for the quick reply
I tried using OCS-DP instead of single and get little over 100 channels on 119w and with single I get 254 chanells and with legasy A I get 304 channels but some good channels like science and few more are missing so I left it on single.

**blondinchik** · August 30th, 2008

As I understend the working principle of legacy lnb's you have to chose lnb A or lnb B in Legacy switch option to switch betwen two lnb's , so I tried that with no result. I changed ports around on Diseqc with no luck.

jammyjam · September 1st, 2008

You need to delete the first transponder off of 119. i did that and it showed me 119 everytime since.110 and 119 both start off with 12224 as the first tp. Remove 12224 from 119. Start with 12239 and then scan. Try that.

**bigevil69** · September 1st, 2008

from the way i read your post you have 31" dish onport 1 and dish 500 with 1 cable going to port 3
if this is so you need to run a 2nd cable from dish500 to port 2 on switch the set up 119 on port 2 in your settings like you did 110

**gibahca** · September 1st, 2008

110w
LNB power----------- on
LNB Type------------ OCS-DP
LNBFreq------------- 11250
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 2
Motor--------------- off
Legacy switch------- none
Tpfreq---------12224

119w
LNB power----------- on
LNB Type------------ OCS-DP
LNB Freq------------- 11250
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- none
TPfreq---------12239

97w galaxy 25
LNB power----------- on
LNB Type------------ universal
LNB Freq------------- 10750
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 3
Motor--------------- off
Legacy switch------- off

**arboristman** · September 1st, 2008

Quote:

Originally Posted by blondinchik

Hey guys
I have sv360 premier and 2 dishes 1st dish is dn500 with legasy lnb's on 110 and 119 second dish 31'' on galaxy 25 Both of them connected to diseqc 4x1 switch on port 1 for 31'' dish and port 3 for dn. I can see galaxy 25 and 110 but no 119 and i tried everything in setup with no luck.

my setup
110w
LNB power----------- on
LNB Type------------ single
LNB Freq------------- 11250
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 3
Motor--------------- off
Legacy switch------- sw21 lnb A..........turn off.

119w
LNB power----------- on
LNB Type------------ Single
LNB Freq------------- 11250
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 3
Motor--------------- off
Legacy switch------- sw21 lnb b........turn OFF

but in right upper corner with these settings still show 110w and I change every possible option and no luck

97w galaxy 25

LNB power----------- on
LNB Type------------ universal
LNB Freq------------- 10750
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off

I don't have any more options to try

you say your running legacy lnbs.(meaning two) but you say "dn is connected on port 3"
this is incorrect.
you need to connect each lnb one for 119 and the other for 110 into ports 2 and 3,and then change the ports to match how you connected them outside.
so for example 119 will be port 2 and 110 will be port 3.doesn't really matter,as long as you match it in your antenna settings see what i mean?

ditch telling the unit your using an sw21 switch,cus you know your not.so leave that off.

your lnb types will all be single.
11250 tp freq for 119/110
and 10750 for g25

**blondinchik** · September 1st, 2008

Thank you for reply I will try these settings and will let you know if anything changes