Connecting to TV - Nothing

[george188]

I am using the RCA Cable connecting to my TV but cannot even see the Menu setup so I am thinking I am not connecting them correctly.

FTA rear has two columns of RCA jacks/plugs with white, yellow, and red.

The manual says connect the Red cable/plug at Video from the FTA box (which has video at bottom and pr left next to it ) to the Video in my TV. Plug Audio from the FTA box (which says audio) to the Audio in my TV.

Have done this more than 10 times but no pic or anything like the SV menu.

Please Help.

[gibahca]

Originally Posted by george188

I am using the RCA Cable connecting to my TV but cannot even see the Menu setup so I am thinking I am not connecting them correctly.

FTA rear has two columns of RCA jacks/plugs with white, yellow, and red.

The manual says connect the Red cable/plug at Video from the FTA box (which has video at bottom and pr left next to it ) to the Video in my TV. Plug Audio from the FTA box (which says audio) to the Audio in my TV.

Have done this more than 10 times but no pic or anything like the SV menu.

Please Help.

Plug yellow to video and red/white for audio.

[tb1971]

You need to use the jacks in this column----------------------------^^^^-------

[george188]

Originally Posted by gibahca

Plug yellow to video and red/white for audio.

Did exactly as u said: Yello to video and first tried Red for audio and then White for audio but all failed. Still snow flakes on on this TV screen.

thanks

[cisco123]

take your tv and put it on video should be a button for that

[gibahca]

There is a label beside the connectors on your tv saying each video you are pluged at.
video 1..video 2..etc..etc.