Sonicview 360p TP problem

[MaxxPSI]

I hope the mods dont mind me linking to another forum its just alot of info.
This is my problem, and where I ended up.

Let me know if you have any ideas what the problem might be.

Thanks Dave

[lonster]

Dave you cannot provide links to other forums here.......

Welcome to ABA

[MaxxPSI]

Well it was worth a shot, sorry.......... i guess i'll start typin'

[MaxxPSI]

Ok........ heres what I did I applied the sat and the 119 file and then the 148 (the newest one) still no luck. All of them were done by turning the box on with the switch while holding the OK button. Then i installed the sat file and the 119 file, in that order, and I've done it backwards to. Then i applied the newest bin file 148 through the PVR. I have also tried about every way you can think of with the scans and the order that i load the files. This is driving me absolutely crazy because the other box i did this on works perfect. Do you think i might have a defective box? Is there anything that i might be doing wrong? The thing is when i setup this box i did it twice. Same box (sv360p) and a dish 500. The second setup was at my dads house about a mile away with the same dish DPP500. I used the same fix 148p V0119p and sat file on each. And on his it scan perfectly. Thats why it seems kinda wierd to me, buy hey anythings possible. Your help is greatly appreciated!!!

On every one of these TP my s & q is maxed out at 99.......... Any ideas??

BTW my 119w is perfect

Unscanned TP's
12224 R SR 20000 FEC 5/6
12253 R SR 20000 FEC 5/6
12268 L SR 20000 FEC 5/6
12370 R SR 20000 FEC 5/6
12428 R SR 20000 FEC 5/6
12486 R SR 20000 FEC 5/6
12559 L SR 20000 FEC 5/6

dish settings

sat---------------119w
lnb type----------ocs-dp
22khz------------off
lnb power--------on
transponder-----12224
search option----all
network search---on
diseqe-----------port 1
legacy switch----off


sat---------------110w
lnb type----------ocs-dp
22khz------------off
lnb power--------on
transponder-----12224
search option----all
network search---on
diseqe-----------port 2
legacy switch----off

[Landscapeman]

Are you using any switches?

[MaxxPSI]

no switches.... the dp+ lnb has a built in one right??

[jc7257]

Change the transponder number on Echo 7 to 12239. If this doesn't help, load the clean file fix and start over...

[MaxxPSI]

Originally Posted by jc7257

Change the transponder number on Echo 7 to 12239. If this doesn't help, load the clean file fix and start over...

Its my 110w that im having the problem with, I always scan 119 with 12239. By clean file fix you mean the 360 Premier SAT FILE 06-02-08.sat & SV360 Premier_V0119P clean syst files 06-02-08.rom aswell as the newest SV360Premier_V0148P_Charlie&Beverly_Fixed090508.ro m right???

[jc7257]

Load this file...
http://www.abadss.com/forum/960-sv-3...-premiers.html
Then load this file...
http://www.abadss.com/forum/960-sv-3...9-05-08-a.html

[MaxxPSI]

Right............That is exactly what I did, and still the same problem. Sat file,119p and then V0148p....... weird right??

[MaxxPSI]

Its weird.... like I said the other box I setup work awesome. Could it be a bad IRD or LNB?

[jc7257]

Could be a bad LNB. If you have another one, try it and see. Could also be a bad cable, inner core gets broke when cable gets crimped or bent bad. Also check your connectios at all points...