Echo 7 and Echo 8 Problems - Update Thread - ABA DSS

**cr812** · September 7th, 2008

Hi folks,

After making a few changes in dish settings, I am now able to get both echo 7 and echo 8 !!!!!!!!!! (I had to change the legacy switch to sw21..., instead of off)

So, I did a factory reset which cleared everything. I then applied the latest bin file, updated my user settings, then scanned echo 7, then echo 8.

I now have some duplicate channels, some missing channels, epg with some channels showing "No Information" and very few PPV's.

If anyone cab provide some assistance to these four issues, I would be greatly appreciated.

Thanks

rmptxb · September 8th, 2008

i am having problem getting signal from both satellites at same time. what dish setting are you using on echo 7 and echo 8.

**cisco123** · September 8th, 2008

need to list your settings.sounds like your settings are of a little getting dups.

**cisco123** · September 8th, 2008

Quote:

Originally Posted by rmptxb

i am having problem getting signal from both satellites at same time. what dish setting are you using on echo 7 and echo 8.

it depends on what your are testing need to list your dish and lnbs and what your want to hit

AZ1Hobo · September 8th, 2008

I'm using a DN 500 with a DPP Twin on a SV360 Elite. I have the latest bin 1.51 installed but just can't get the 119 & 110 to come in right. When I have picked up channels it has been mostly C stations and that is not my main preference.

Now I have switched over to my second dish and have 119 on by itself with a single DTV LNP. It scanned with a 69-71 S and 98 Q, picked up channels but after 20 minutes they are still all scrambled.

I know the frerq is 12250 and the TP should be 12224. With my single dish I have no switches and LNB is set to single.

The priority question for me is what should the LNB Type be set to when using the DPP Twin LNB and what should the Legacy switch be set to to get both 119 & 110 on the DN 500

Secondly why on the single LNB dish is it saying it is tuned to 119 but saying it is on and also scans 91?

Going nuts, any help is greatly appreciated

**gibahca** · September 8th, 2008

You are not hitting the right sat on your single dish.
For your D500 your LNB type should be ocs-dp.

And don't forget..there is a ECM going on today.
DN and BEV are down.

AZ1Hobo · September 9th, 2008

Thank You, I am patched, re pointed and back in business.

**gibahca** · September 9th, 2008

Good buddy.
Thank you for your reply.
Enjoy your tv.