EPG Setup Changes

[cr812]

Does anyone know how to make adjustments to the EPG on the SV-360 Premier???

Other stb's allow you to change the amount of time shown in the EPG (ie 3 hours, 2 hours etc), or restrict the channel description.

I find that the EPG is very cluttered and difficult to read.

Are there any program fixes out there that change the appearance??

Thanks

[baron1]

on my elite i can change the epg time from 3 hours to 1 1/2 hours.the premium might be the same.
when i bring up the guide i push the play button while the guide is showing you will see a blink but nothing will change but if you exit out of the guide and bring the guide back up the times will change.

[jc7257]

It works the same way on SV-360 Premier, thanks baron1...

[basscat02]

c&p
How To Populate EPG Guide On Your Sonicview SV-360 Premier PVR
How To Populate EPG Guide On Your Sonicview SV-360 Premier PVR

1) Make sure your Time Zone is set to your area.
With the remote, Menu -> System Settings -> Time Settings -> Time Offset

2) Press the SAT button on remote.

3) Scroll down to EchoStar Package and select.

4) Now, just use the remote control and power the unit down. The time clock will appear on the LED on the front of the receiver. Wait about 5 minutes.

5) Power back on with the remote and your guide will now be filled up.

Your Guide (also called EPG which stands for Electronic Program Guide) should now be populated.

You can also first set the duration of this in the Menu -> System Settings -> User Options(Misc.) -> Guide Dates -> right or left arrow for 1 Day or 3 Days or 7 Days

Enjoy your Sonicview SV-360 Premier!
__________________
Thanks to Woodcreeker for this info

[gibahca]

And dont forget, with you're on DN and BEV(together) setup it to only 3 days or it'll not populated on BEV channels.