SV 360P reboots itself? - ABA DSS

**tb1971** · July 2nd, 2009

This has been going on for awhile and not sure if this is normal? About every 5th time I go into any of my menu settings and make changes if neccessary, then I hit the "exit" button my receiver reboots itself. Has anyone else ever experienced this before?

**zekester** · July 2nd, 2009

Nope not yet. Probably a Bin issue though.

**tb1971** · July 2nd, 2009

This has been happening long before the ihub bins.

**tb1971** · July 2nd, 2009

bump...bump

**zekester** · July 2nd, 2009

Have you tried your factory default/cleaner file route???

capncrunk · July 2nd, 2009

I posted about this quite a while ago and got no response.

It went away for a bit after i fixed my wiring and re-pointed my dish... maybe 3 months i didn't have any issues, but now is back with the Ihub....

It is my feeling that when there is any instability connected to the box IE: bad switch, hardly functioning Ihub, bad LNB the box doesn't handle it well and these forced hard reboots happen...

capncrunk · July 2nd, 2009

Oh, i used to get it after punching in my code to access certain porn channels. not all porn, just some or one..

changed to porn channel, prompted for my pin, Typed 0000, box would hard reboot and then i would be right in with the channel open.

My box is also a 360p

oplassman · July 2nd, 2009

I have had the same issue for quite some time. I don't have a answer for you, but I figuerd it was normal. It's been going on for about 6 months and I figuerd since we were up the whole time I didn't wan't to mess with a good thing! I've moved both dishes and still have the problem, but think you might have something with the lnbs Ive been seeing weird fluxuations in my pro lnb could be going bad I'll change it out and let you know if it has helped with the issue.

**tb1971** · July 2nd, 2009

Its happening more now cause im messing with my ihub settings alot.

capncrunk · July 2nd, 2009

I'd say you are right tb, about every 5th time i change my IP settings to get the picture back, box reboots. sucks because all epg info goes away when that happens.

**tomh1319** · July 2nd, 2009

My 8000 and my 360 prem, both are doing it . Wtih last ihub file the 8000 after i loaded it the file and it whent to reboot it rebooted 3 times in a role by its self.

**tomh1319** · July 2nd, 2009

I thank it dont have enough memory or fast enough processesor ?

**zekester** · July 2nd, 2009

For what?????

Quote:

Originally Posted by tomh1319

I thank it dont have enough memory or fast enough processesor ?

**tb1971** · July 2nd, 2009

Well atleast im not the only one, hopefully it doesnt fry my receiver.

**zekester** · July 2nd, 2009

I was thinking that also. Can too many reboots fry a receiver??

Quote:

Originally Posted by tb1971

Well atleast im not the only one, hopefully it doesnt fry my receiver.

**tomh1319** · July 3rd, 2009

Quote:

Originally Posted by zekester

For what?????

To keep up with what it is trying to do .

capncrunk · July 3rd, 2009

Quote:

Can too many reboots fry a receiver??

Well, i'm on somewhere between 20 and 307 so... i hope not

capncrunk · July 3rd, 2009

Quote:

...I thank it dont have enough memory or fast enough processesor
...To keep up with what it is trying to do .

I don't think the boxes are the issue, it's on the server end. the small amount of info sent thru a serial port could be processed by a nice calculator. If anything it's possible that a serial port is not fast enough to request and receive the data without skipping in the picture. But a key is not that much data from what i understand.

**bigevil69** · July 3rd, 2009

make sure your dish is grounded and see if that might help
all my receivers work fine with no problems like that so far

capncrunk · July 3rd, 2009

My dish is not grounded...

I wanted to add that my local settings (city and state) are reset when the box reboots itself.