Viewsat IKS this Rumors Only - ABA DSS

**carlos60** · June 28th, 2009

Remember this Rumor Only

c/p

Right now there is rumor that Viewsat will be using IKS (Internet Key Sharing) in the newest files. And for you negative people here is a pic of of what can be used.

This is a Rs232 (serial post) to RJ45 (LAN port). What this will do it "PUSH" the updates to the receiver like a Neosat and other IKS compatible receivers. Receivers like this can be run in 2 ways. IKS mode meaning it will share the "key subscription" and works with Nagra3. Since it's not a wide open you just share someone's legit subscription. The other mode it can run in is full emu, loading the updates like we do now and unlocks everything by autorolling the public key. A public key is a "master" key that unlocks everything.. I know what yer thinking and say why do they need a public key? I can go into detail but this is about IKS.

Next question is Will all receivers be able to use IKS? In theory yes, it's matter of programing and making a "dongle" like the one pictured above and making the drivers work for it. Same kinda drivers are needed for any USB device on a receiver. Coders made a universal driver for FAT 16 and i think 32 but NTFS is not compatible because the driver is for FAT.

All i can say is i hope with works out and IKS will soon be here.

"Angel wrote this here is your credit"
BTW -- I wrote this article out of pure rumor. I notice it on other FTA sites, some calling it rumor or fact but there is no fact to it. I was mealy stating that after all is said and done IKS is not impossible for viewsat receivers. Anyone that feels like plagiarizing me can but at least give me some credit.

haseeb · June 28th, 2009

i hope this is not true, i dont want to take the IKS Way out

**sierra77** · June 28th, 2009

Message from coders

By now the word has spread across the internet and satellite forums alike that the N2 stream has finally come to an end. The N2 FTA hack was born on Sept 1st, 2005. It was first seen to be true by those who owned the Coolsat receivers. Back then Coolsat was king while Viewsat was still getting out of diapers. None the less, the N2 release spread like wild fire through the FTA community and before long all brands of that time had channels back up on DN. Bev didn't come till a few months later after already being dark for several months. We are once again at that crossroad. Bev has been dark now for several months and DN has just completed it's switch over to the new N3 encryption. There are many new brands and Coolsat, well is far from king. We have seen the birth of other new brands such as Captive Works, CNX and Sonicview while Viewsat has prevailed to be a mature and respected force in the FTA community.

While there is a new beast that has become popular in FTA in North America. This way of getting channels out of the dark has been in use for a long time in Europe and is by no means anything new. I am talking about IKS or otherwise also known as ICS. While this type of system is not the most liked due to safety reasons it has gotten more popular as more get desperate to get there once loved Free TV back. This has started making many brands start supporting ICS. Well the Viewsat Team is not one to go down that road and will continue to make sure that the standalone file prevails. Yes the Viewsat Team has had a few snags and wish to be further along than they are with a N3 release. Don't get me wrong they have gotten very far in progress now and with a bit more time they will show once again who is #1 and who is willing to continue making FTA users very happy just like they did back in the Summer of 2006 when the providers thought Map57 would end it all. Some will say these words are just a ploy to sell more receivers. Well it isn't, it is just how it will be. I have always been one to be straight up with the public and this time is no different. I do not expect all to go running out to buy a Viewsat tomorrow with nothing to show. The proof will be in the pudding. It's just the pudding isn't quite ready to be served just yet. Many have always said History likes to repeat itself. From fashions of the 70s appearing again to the fall of the stock markets plummeting again. We can expect the same within the FTA community and its prevailing with a N3 release.

The Viewsat Team would like to thank all its supporters and are working very hard to continue to support you the way they have done in the past. Summer is hear enjoy it and don't let TV run your life. Remember to support the providers with a back up sub, because after all without them there would be no need to provide a fix.

**phylop** · June 28th, 2009

I read that their also coming out with new iks unit that is working.

**tiger-55** · June 28th, 2009

thats all there is a waiting game, hope view sat pull it through, i would not beleive any thing till our mode post something positave here.

raray · June 28th, 2009

Quote:

Originally Posted by sierra77

Message from coders

By now the word has spread across the internet and satellite forums alike that the N2 stream has finally come to an end. The N2 FTA hack was born on Sept 1st, 2005. It was first seen to be true by those who owned the Coolsat receivers. Back then Coolsat was king while Viewsat was still getting out of diapers. None the less, the N2 release spread like wild fire through the FTA community and before long all brands of that time had channels back up on DN. Bev didn't come till a few months later after already being dark for several months. We are once again at that crossroad. Bev has been dark now for several months and DN has just completed it's switch over to the new N3 encryption. There are many new brands and Coolsat, well is far from king. We have seen the birth of other new brands such as Captive Works, CNX and Sonicview while Viewsat has prevailed to be a mature and respected force in the FTA community.

While there is a new beast that has become popular in FTA in North America. This way of getting channels out of the dark has been in use for a long time in Europe and is by no means anything new. I am talking about IKS or otherwise also known as ICS. While this type of system is not the most liked due to safety reasons it has gotten more popular as more get desperate to get there once loved Free TV back. This has started making many brands start supporting ICS. Well the Viewsat Team is not one to go down that road and will continue to make sure that the standalone file prevails. Yes the Viewsat Team has had a few snags and wish to be further along than they are with a N3 release. Don't get me wrong they have gotten very far in progress now and with a bit more time they will show once again who is #1 and who is willing to continue making FTA users very happy just like they did back in the Summer of 2006 when the providers thought Map57 would end it all. Some will say these words are just a ploy to sell more receivers. Well it isn't, it is just how it will be. I have always been one to be straight up with the public and this time is no different. I do not expect all to go running out to buy a Viewsat tomorrow with nothing to show. The proof will be in the pudding. It's just the pudding isn't quite ready to be served just yet. Many have always said History likes to repeat itself. From fashions of the 70s appearing again to the fall of the stock markets plummeting again. We can expect the same within the FTA community and its prevailing with a N3 release.

The Viewsat Team would like to thank all its supporters and are working very hard to continue to support you the way they have done in the past. Summer is hear enjoy it and don't let TV run your life. Remember to support the providers with a back up sub, because after all without them there would be no need to provide a fix.

This is a old post. I think that the N3 card is VERY hard to crack at this time?

sam008 · June 28th, 2009

This thread like other VS thread is just BS... yes BS

Don't buy into the crap, let them show you a real proof, don't be fooled into buying VS w/o some real fix.
Look at some other Viewsat BS...
http://www.abadss.com/forum/964-fta-...-n3-today.html

Viewsat to release new N3 files today this morning, Bev up

and so on.... just trying to sell VS, NEVER BUY ANY STUFF UNLESS YOU SEE IT WORKING!

Look at http://www.abadss.com/forum/854-view...vs-coders.html
#46 in Oct 2008, it was already suggested to support IKS, nothing new.

sam008 · June 28th, 2009

Also, look at those crazy Google ads for N3, that makes me laugh...
viewsat fix - Google Search

**Bobby67fb** · June 28th, 2009

Who in their right mind would buy a non iks stb right now.

emsudos · June 28th, 2009

Quote:

And for you negative people here is a pic of of what can be used.

So if the pic wasn't posted would that of made me anymore less negative? What the hell does a picture have to do with being negative?

Priestmill · June 28th, 2009

It's a good design.

**slowboy** · June 28th, 2009

how do you get one ????

**cdo_care** · June 28th, 2009

Negative or positive is Fine.. Thanks for sharing carlos.

**mandydish** · June 28th, 2009

Quote:

Originally Posted by carlos60

Remember this Rumor Only

c/p

Right now there is rumor that Viewsat will be using IKS (Internet Key Sharing) in the newest files. And for you negative people here is a pic of of what can be used.

This is a Rs232 (serial post) to RJ45 (LAN port). What this will do it "PUSH" the updates to the receiver like a Neosat and other IKS compatible receivers. Receivers like this can be run in 2 ways. IKS mode meaning it will share the "key subscription" and works with Nagra3. Since it's not a wide open you just share someone's legit subscription. The other mode it can run in is full emu, loading the updates like we do now and unlocks everything by autorolling the public key. A public key is a "master" key that unlocks everything.. I know what yer thinking and say why do they need a public key? I can go into detail but this is about IKS.

Next question is Will all receivers be able to use IKS? In theory yes, it's matter of programing and making a "dongle" like the one pictured above and making the drivers work for it. Same kinda drivers are needed for any USB device on a receiver. Coders made a universal driver for FAT 16 and i think 32 but NTFS is not compatible because the driver is for FAT.

All i can say is i hope with works out and IKS will soon be here.

"Angel wrote this here is your credit"
BTW -- I wrote this article out of pure rumor. I notice it on other FTA sites, some calling it rumor or fact but there is no fact to it. I was mealy stating that after all is said and done IKS is not impossible for viewsat receivers. Anyone that feels like plagiarizing me can but at least give me some credit.

that might verywell be the case carlos,thanks for the info body

**jc7257** · June 28th, 2009

I think Viewsat is doing same as Sonicview, creating a IKS connection to keep there customers happy, while Nag 3 work continues. Keeping customers happy is rule #1...

**jell691** · June 28th, 2009

viewsat people have said, and are STILL saying, NO WAY to iks. i as a viewsat owner hope they stick to their guns on this one.

sam008 · June 28th, 2009

I don't mind IKS solution (if one exists) for VS, as long as they don't loose focus from full N3 fix.

As far as posting pic of "the dongle", it is just BS CRAP

Anyone can post photo of generic rj45 to serial adapter.

Well I saw the other day VS has USB to RJ45 adapter they just release to small group of people

like myself who can test N3 on IKS for VS, as a proof here is the photo...

I see all channels, PPV & Porn... also see DEAD people... I got scared & turned off the TV & FTA, buried in the ground.

Seriously, How much did Viewsat paid you carlos60 for posting this?

**gibahca** · June 28th, 2009

Thats only C/P, you know what that means?
copy and past, this is not his own post,