Viewsat Ultra Lite Setup

[Phasthands]

What are the settings for the Viewsat UL so I can picup the dish freq. I have 110 set at:
LNB POWER = ON
LNB TYPE = OCS-DP
LNB FREQ = 11250
22KHZ = OFF
TP FREQ = 12224
DISEqC = PORT 2
MOTOR = OFF
LEGACY SWITCH = OFF

119 SET AT:
LNB POWER = ON
LNB TYPE = OCS-DP
LNB FREQ = 11250
22KHZ = OFF
TPFREQ = 11239
DISEqC = PORT 1
MOTOR = OFF
LEGACY SWITCH = OFF

Are these settings correct? I have good signal and quality and show the sat I.D.'s. When I scan the channels I get 954 total channels but get no video/audio message when I try to view. HELP!!!!!!!1

[boboisno1]

Hello and welcome. You posted in the file only section so nobody could see your question, for future questions please use the help sections. You won't get anything on that sat right now, but the settings are correct if you have something like a dish 500. The settings all depend on the dish and lnb you use, not the receiver really.

[Phasthands]

Originally Posted by Phasthands

What are the settings for the Viewsat UL so I can picup the dish freq. I have 110 set at:
LNB POWER = ON
LNB TYPE = OCS-DP
LNB FREQ = 11250
22KHZ = OFF
TP FREQ = 12224
DISEqC = PORT 2
MOTOR = OFF
LEGACY SWITCH = OFF

119 SET AT:
LNB POWER = ON
LNB TYPE = OCS-DP
LNB FREQ = 11250
22KHZ = OFF
TPFREQ = 11239
DISEqC = PORT 1
MOTOR = OFF
LEGACY SWITCH = OFF

Are these settings correct? I have good signal and quality and show the sat I.D.'s. When I scan the channels I get 954 total channels but get no video/audio message when I try to view. HELP!!!!!!!1

Yes I am using a Dish 500. Thank you for the quick response!! Are those sats down?

[rgdeb]

does anyone no when we mit get up

[hazwis]

your settings are correct but there are no working bins for VS currently on DN or BEV.

[snakebite]

Originally Posted by rgdeb

does anyone no when we mit get up

nobody knows when a file will be released as of yet ,we all have are fingers crossed but not looking to good at the moment .there are a few recievers up with -iks-ihub-dongle ,these recievers need constant internet connection to view channels.the recievers are sonicview(not all models) k-box - cnx- nfusion and neosat ipro.

[carlos60]

We are black now

Originally Posted by Phasthands

What are the settings for the Viewsat UL so I can picup the dish freq. I have 110 set at:
LNB POWER = ON
LNB TYPE = OCS-DP
LNB FREQ = 11250
22KHZ = OFF
TP FREQ = 12224
DISEqC = PORT 2
MOTOR = OFF
LEGACY SWITCH = OFF

119 SET AT:
LNB POWER = ON
LNB TYPE = OCS-DP
LNB FREQ = 11250
22KHZ = OFF
TPFREQ = 11239
DISEqC = PORT 1
MOTOR = OFF
LEGACY SWITCH = OFF

Are these settings correct? I have good signal and quality and show the sat I.D.'s. When I scan the channels I get 954 total channels but get no video/audio message when I try to view. HELP!!!!!!!1