Config problems

[jacontrerasv]

This are my configs.... i get CERO SIGNAL

Antenna setup:
Satellite.........................echostar 8,10
LNB power.......................on
LNB type.........................OCS_Dp< w/Dp lnb
LNB freq..........................11250
22 khz...........................off
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................port 2
motor............................off
legacy sw......................none

Satellite.........................echostar 7
LNB power.......................on
LNB type.........................OCS_Dp< w/Dp lnb
LNB freq..........................11250
22 khz...........................off
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................port 1
motor............................off
legacy sw......................none

[fernrascal]

your dish might need some adjustment

[jacontrerasv]

it was workig fine... it fails when i upgrade from PFTAUSW-080722UL to pftausw-080723UL

I do a reset to defaults and I can make it work

=( =( =(

[jacontrerasv]

1 I download the ODS1300FM-v0102-080527-VIEWSAT.PEG file
2 reset to defaults
3 uload by USB the ODS1300FM-v0102-080527-VIEWSAT.PEG file
4 reboot
5 turn off by back switch
6 I donload the PFTAUSW-080723UL.PEG bin
7 upload by usb the PFTAUSW-080723UL.PEG bin
8 reboot
9 turn off by back switch

RESULTS:

BOX can't hold the antenna configurations.
Cero signal

[jacontrerasv]

I'll follow all instructions even the obvious ones... cables and connections ok, everything on its place and working.
I cannot see the name of the bird on the screen.

When i configure the antenna options and I turn off my box the antenna configs reset to:

Antenna setup:
Satellite.........................echostar 8,10
LNB power.......................on
LNB type.........................UNVERSAL< w/Dp lnb
LNB HIGH..........................10600
LNB LOW...........................97500
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................none
motor............................off
legacy sw......................none

Satellite.........................echostar 7
LNB power.......................on
LNB type.........................UNIVERSAL< w/Dp lnb
LNB HIGH..........................10600
LNB LOW...........................97500
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................none
motor............................off
legacy sw......................none


Thanks for all advices.


PD: I will continue my future post on this matter here sorry for the double posts.

[fordman01]

Originally Posted by jacontrerasv

I'll follow all instructions even the obvious ones... cables and connections ok, everything on its place and working.
I cannot see the name of the bird on the screen.

When i configure the antenna options and I turn off my box the antenna configs reset to:

Antenna setup:
Satellite.........................echostar 8,10
LNB power.......................on
LNB type.........................UNVERSAL< w/Dp lnb
LNB HIGH..........................10600
LNB LOW...........................97500
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................none
motor............................off
legacy sw......................none

Satellite.........................echostar 7
LNB power.......................on
LNB type.........................UNIVERSAL< w/Dp lnb
LNB HIGH..........................10600
LNB LOW...........................97500
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................none
motor............................off
legacy sw......................off


Thanks for all advices.


PD: I will continue my future post on this matter here sorry for the double posts.

Antenna setup:
Satellite.........................echostar 8,10
LNB power.......................on
LNB type.........................UNVERSAL< w/Dp lnb ocs-dp
LNB HIGH..........................10600 11250
LNB LOW...........................97500
TP freq..........................12224<spot beam
search option..................all
Diseqc 1.0......................none lnb2 or port2
motor............................off
legacy sw......................none

Satellite.........................echostar 7
LNB power.......................on
LNB type.........................UNIVERSAL< w/Dp lnb ocs-dp
LNB HIGH..........................10600 11250
LNB LOW...........................97500
TP freq..........................12239<spot beam
search option..................all
Diseqc 1.0......................none lnb1 or port1
motor............................off
legacy sw......................off

hope that helps

[fordman01]

the reason for it not saving it could be low signal & quality so your dish might need some adjustment

[jacontrerasv]

Ok.... finally I got everything working, it was hard, but whit the help all you give me I did it.

The box is working perfect....

Solution:

complete change of cables from the antenna to the box and factory bin + upgrade to latest bin


Thanks to everyone!!