 |
August 13th, 2008
|
#1 (permalink)
|
|
FTA Newbie
Join Date: Jul 2008
Posts: 16
Thanks: 0
Thanked 1 Time in 1 Post
Rep Power: 0
|
okay there seems to be some channels that I cant get
these are my settings any suggestions on scans or anything that can get me channel 455 and espn espn2 and other channelss Im missing I was messing around the day of the ufc fght and finally got that channel but then it froze and I had to re-scan now all it says on that channel is you have a dish 500 BS. Any help would be great. and I dont knopw why ths site keeps cock blocking me from sending messages also I ddnt put those smily faces in so just disreguard those
echo 8,10
lnb: on
lnb type  cs
lnb freq:11250
22khz  ff
tp freq:12224
disq  ort 2
motor  ff
legacy sw  ne
echo 7
lnb  n
lnb type  cs
lnb freq.:11250
22khz  ff
tp freq.:12239 keeps defaulting back to 12224 when I go back into screen
disq:PORT 1
motor  ff
leg sw  e
|
|
|
August 13th, 2008
|
#2 (permalink)
|
|
Veteran Abadss Member
Join Date: Oct 2007
Location: Canada/Brazil(Toronto-Rio de Janeiro)
Posts: 2,939
Thanks: 600
Thanked 907 Times in 735 Posts
|
Re: okay there seems to be some channels that I cant get
You are all right.
Did you have started from the begining?
A factory default,load the new bin and scan the channels?
__________________
Testing Viewsat Pro 33",Invacom QPH031,HH90 motor
PS3 60GB(Playing a lot!!)
|
|
|
August 13th, 2008
|
#3 (permalink)
|
|
Expert Site Helper
Join Date: Dec 2006
Posts: 1,722
Thanks: 221
Thanked 707 Times in 586 Posts
|
Re: okay there seems to be some channels that I cant get
you may have low quality on the weaker transponders. you may need to tweak your dish.
if this is not the case, as above, write down your antenna settings, do a factory default, re-enter your antenna settings and channel scan 1 bird at a time. dn has moved some channels last month, could also be related.
|
|
|
August 13th, 2008
|
#4 (permalink)
|
|
Expert Site Helper
Join Date: Sep 2007
Posts: 2,799
Thanks: 1,858
Thanked 1,827 Times in 1,053 Posts
|
Re: okay there seems to be some channels that I cant get
Bizzone,
DN has been doing alot of channel moving lately. They are setting up the new eastern arc.
So do a rescan and provided your setup properly you will get all they have to offer.
As for the "C@ck Block" the pm system is for personal messages. Not help requests. Help requests must be made in the appropriate sections. Someone will help you.
Thanks
Lonster
__________________
Testing.. SV8000HD, SV360 elite, Nfusion Nova, CNX Duo,Captain8000HD
So uh, I said to myself..... And I know it was myself because I recognized my voice.....
The knowledge I share is intended to fulfill a persons interest in a particular subject. I do not recommend or endorse the use of any information I may provide for theft in any form.
|
|
|
August 13th, 2008
|
#5 (permalink)
|
|
FTA Newbie
Join Date: Oct 2007
Posts: 26
Thanks: 0
Thanked 3 Times in 1 Post
Rep Power: 0
|
Re: okay there seems to be some channels that I cant get
please i just purchased a viewstat ultra i am having problems trying to get the 110 tp using f1 auto port 1 on instruction it has tp freq 12339 for echo 7 icant find that freq in mt set up echo 8 has the same freq you listed but f1 auto search still failed.
|
|
|
August 13th, 2008
|
#6 (permalink)
|
|
Veteran Abadss Member
Join Date: Oct 2007
Location: Canada/Brazil(Toronto-Rio de Janeiro)
Posts: 2,939
Thanks: 600
Thanked 907 Times in 735 Posts
|
Re: okay there seems to be some channels that I cant get
If you have a Dish500 like bizzone make sure your settings are okay like this.
echo 8,10
LNB : on
LNB type  cs
LNB freq:11250
22khz  ff
TP freq:12224
disq  ort 2
motor  ff
legacy sw  ne
echo 7
lnb  n
LNB type  cs
LNB freq.:11250
22khz  ff
TP freq.:12239 keeps defaulting back to 12224 when I go back into screen
disq:PORT 1
motor  ff
leg sw  e
__________________
Testing Viewsat Pro 33",Invacom QPH031,HH90 motor
PS3 60GB(Playing a lot!!)
|
|
|
|
Related Content
|
#1.5
|
|
|
|
|
|
| Thread Tools |
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
|
|
- Members: 336,297
- Users Online: 418
- Forum Threads: 71,886
- Forum Posts: 480,904
|