Help A Newb~

[chachi68]

Originally Posted by inoastar

done. and i still have no change. i run the auto scan and it came up with nothing.

menu/system info receiver info...2nd line will tell you what program is installed into receiver...once you have loaded the factory file followed by the 080908ul file...you need to go into antenna setup to enter these correct settings...

satellite....on
lnb power..on
lnb type....standard
lnb freq.....11250
tp freq......12224
22khz........off
search option...all
net. search......on
diseqc...none
motor...off
legacy..none

once your settings are correct go to autoscan and put a checkmark on 91w
than exit and scan sat...

[inoastar]

Originally Posted by chachi68

menu/system info receiver info...2nd line will tell you what program is installed into receiver...once you have loaded the factory file followed by the 080908ul file...you need to go into antenna setup to enter these correct settings...

satellite....on
lnb power..on
lnb type....standard
lnb freq.....11250
tp freq......12224
22khz........off
search option...all
net. search......on
diseqc...none
motor...off
legacy..none

once your settings are correct go to autoscan and put a checkmark on 91w
than exit and scan sat...

I have done all of that. And still no luck. do i have a dead recever?

[edwinsao]

what happen if you move your lnb type to universal??

[inoastar]

ill give it a try..

[inoastar]

Nope, still no channels.