Help A Newb~

[inoastar]

I have a viewsat ultra lite, a dish with a single LNB. Ive uploaded the fix file and im receving 80% signal and 79% Quality.

But im unable to populate a channel list, am i doing this right?

[edwinsao]

did you scan your sat???

[inoastar]

yes, i hit auto scan and i got nothing

[edwinsao]

ok what sat you try to scan??

[inoastar]

nimiq 1,3 91.0w

[edwinsao]

Antenna Setup:
Satellite.................nimiq 1.3
LNB Power .............ON
LNB Type...............standar
LNB Freq................11250
22KHz....................OFF
TP Freq..................12224
Search option..........All
DiESqC 1.0..............none
Motor ...................OFF

[edwinsao]

Originally Posted by edwinsao

Antenna Setup:
Satellite.................nimiq 1.3
LNB Power .............ON
LNB Type...............standar
LNB Freq................11250
22KHz....................OFF
TP Freq..................12224
Search option..........All
DiESqC 1.0..............none
Motor ...................OFF

make sure you have this

[inoastar]

yup, thats what i have it set too

[edwinsao]

and you get no channels??

[jayjay1972]

not familiar with your box but check settings for epg make sure its on and put it on channel 2218

[inoastar]

nope, none

[edwinsao]

ok make sure your sttings are there exit and save,then go to channels scan and pick auto,press F1 and go down and select nimiq1 now exit once and click start scan

[inoastar]

Originally Posted by jayjay1972

not familiar with your box but check settings for epg make sure its on and put it on channel 2218

I dont see where i can do this. Whould it be in channel scan? or antenna setup?