[matthehacker]

Ok heres the deal.

First off, I am new to this.

I am paying for dish network tv right now.

I have a dish 500 on my roof. 2 LNB's

Its setup for 2 recievers, 1 upstairs, 1 downstairs

I am having problems. Right now, I am getting I think all of the channels, but whenever I change channels, i get auto processing. I have the latest BIN and in order to get my channel to pop up, I have to turn off my reciever for like 10 seconds and turn it back on and it will start. I guess I don't have some of my settings right or something?

Also, I have to change my TP Freq. alot, because my signal bar will go down to 0

Please help!

[cisco123]

first hello and welcome to aba....
now are u using any switches?
and what are your settings?

[MgGibson2]

my panny 2700a has been having a delay with channel change with this latest file...don't know how relevant it is to your prob...3-10 sec. before it comes on.

And by the way......

come on in, stay awhile, kick ur shoes off,,,wee haaaa
it's a great place to be................................................
welcome aboard !!! (and i don't even work here) he he he he

[snakebite]

make sure switches and dish is grounded when running 2 recievers.

[matthehacker]

idk about switches or anything. I have not installed anything dish network has. Im talking about it will not come on unless I turn reciever off and back on.

About being grounded?
How could it not be grounded considering the regular dish network recievers work just fine

I have changed my settings from
Echostar, 7
on
standard
11250
off
12224
none
off
none

Echostar, 10,11
on
standard
11250
off
12224
none
off
none

to these settings, which have been working a little bit better, but still having to turn it off and back on in order for it to work.

Echostar 10, 11
on
universal
11250
11200
12224
port 2
off
none

Echostar, 7
on
universal
11250
10000
12224
port 1
off
none

[bigevil69]

use these

echostar 7 119w
trans 12239
LNB freq 11250
LNB type osc-dp
22khz 0ff
Diseqc number 1
legacy sw off
motor none

echostar 8 110w
trans 12224
LNB freq 11250
LNB type osc-dp
22khz 0ff
Diseqc number 2
legacy sw off
motor none

[matthehacker]

those wont work for me..

[jrichcable]

If you are using a dish 500 with a dishpro lnb change your lnb type settings to ocs dp!! Let us know if this helps.. Good luck

[bigevil69]

look at this and tell exactly what lnb you have

ABA DSS - Free to Air Satellite TV Community - bigevil69's Album: lnb

[matthehacker]

whenever i use the settings above, I dont get any signal in the signal metter.

[matthehacker]

without getting on my roof it looks like this one

ABA DSS - Free to Air Satellite TV Community - bigevil69's Album: lnb - Picture

[bigevil69]

ok try these

echostar 7 119w
trans 12239
LNB freq 11250
LNB type standard
22khz 0ff
Diseqc number off/none
legacy sw sw21 lnb1
motor none

echostar 8 110w
trans 12224
LNB freq 11250
LNB type standard
22khz 0ff
Diseqc number off/none
legacy sw sw21 lnb2
motor none

[matthehacker]

I don't have echostar 8. I have 10,11

[bigevil69]

same sat different name on different receivers

i have one that has it listed 6,8 and one has it 8 and one has it 8,10 and one has it 10,11

[matthehacker]

whoops..double post.

[matthehacker]

still same thing..autoroll processing when I change channels. Doesn't happen everytime but happens quite often.

actually theres a couple of channels I cant get at all even if i do turn it off then back on..
just sits at autoroll processing.

[bigevil69]

what bin file do you have on it

[s2byus]

You can get the info about your dish setup: Port, Satellite, Device, Switch, from the Installation Summary screen of the DN receiver. Let us know these details, so we may better help.

[matthehacker]

I looked on my DN reciever, the only thing that I could find is that its a 500 twin

and I saw DP311 I think thats the receiver though.

And I got the latest bin.

I just changed my settings to the above posted. Still freezes every now in then but the best on ive tried yet. I seen that the latest bin is having problems freezing on some people until they turn it off then back on, or hit menu installation, antenna setup, exit, exit, exit..