neusat 6000 premium help

[smart]

I got sp6000p and i know they are up with 6035bin .
May be some one have the answer for my neusat problem
My neusat works fine with regular cable rgb yellow,white and red but when i try to run with s-video cable it does not work all i see is week signal on my tv neusat is on but no pic on the tv .
I did changed the cable and its the same prolem please help i realy like to hook up with s-video cable.

thanks

[baron1]

on my sp6000reg in menu and users settings their is a place to change between component and s -video depending on the video output that is hooked up.i know the premium is pretty close to the same box. so maybe you don't have the proper output setting selected.i am running s-video with stereo(red-white)

[righty]

my neusat aint working any suggestions

[baron1]

whats it not doing. is it a pre or reg cause reg don' t have file out yet i beleive

[righty]

premium it was working first wnen the bin came out ,it worked for about 20hours then it went scrambled i reboot it 4or 5 times i also reloaded the bin again but still nothing.i checked the keys they were right .i have bev i dont get dn.

[baron1]

you probably did this allready but have you checked to make sure your settings hav'nt changed and you still have good quality and signal,check to see if lnb is still turned on

[baron1]

i have been reading and this is happening to alot of other people. i read everything from hard rebooting, loading factory bin.even saying they had to load new bin 4-5 times before coming back on and then shutting down hours later and having to do samething again. i think V2 is getting close but i think problem is that they don't have bin just right yet. Good news is,this is better than what we had 2 months ago.

[righty]

i have good quality and signal and my lnb is on how do i check to see if the settings have changed?

[baron1]

menu,installation,scroll to what sat you are pointing on and post what your settings say

[righty]

satelite is nimiq 1.3 tp setup 12428 lnb type standard lnb frequency 11250 diseqc-off dish switch-off networksearch-on fta onlt-off pid filter-tvradio 22khz tone-on lnb power-on

[baron1]

looks good for a single dish setup.only thing i see that might be wrong with that setup in 22 tone on.i allways left mine off. when it was on it allways mess with my diseqc. got this off nuesat website



6035 is Not working on B3v anymore, it does on DN with key change and hard reboot.


Do you have away of picking up dn or if you have single dish mark b3v on it for easy access to bring it back, tune in e7 or e8/10 and see if you can get picture and mark that position on dish so you can get either one when the other goes out. see if you can get dn.

[righty]

i have a single dish marked bev. thanks for your time it was greatly appreciated. hopefully they will have another new file soon.once again thanks.

[smart]

Baron1
Thanks for replay i did checked its on s-video for neusat sp600 prem.
And i have cw600 pre it work fine with the same tv and s-video cable i have the same sat up like you do s-video with stereo(red-white).
I can work with red and white cable i can see the neusat is coming on and chanel list i mean i can watch with the rgb cables but not with s-video for neusat sp6000 prem.
thanks