best router for kbox ? - ABA DSS

**nail man** · July 5th, 2009

Can anyone please tell me the best router to use for setting up their "kbox "..thanks

**buddyjh** · July 5th, 2009

I'm using a Belkin N Wireless 27BE93 and have no problems at all with it.

**jc7257** · July 5th, 2009

You can always go hard wire. This is actually the best connection of all. I know some are unable because of running the wire is impossible, but the ethernet cable run from router to Khub will assure a solid connection...

**nail man** · July 5th, 2009

Quote:

Originally Posted by jc7257

You can always go hard wire. This is actually the best connection of all. I know some are unable because of running the wire is impossible, but the ethernet cable run from router to Khub will assure a solid connection...

thanks jc7257...i have that now & still no luck in getting this box to work ...i`ve put about 12 hours in trying to get it to say module connected ...tried everything ...i think it`s a router conflict but don`t know how to fix it , i have disabled firewall setting & even bypassed the router a few times , i`m using a " d-link " router ...thanks

**jc7257** · July 5th, 2009

Ping your PC and see if it shows the Khub connected...

**sayyad** · July 5th, 2009

I think you should change your router to advance one like N router which you can VIA ethernet, your prob will be solve

**nail man** · July 5th, 2009

Quote:

Originally Posted by sayyad

I think you should change your router to advance one like N router which you can VIA ethernet, your prob will be solve

thanks sayyad ...i just went & bought a belkin "n" , i will try & set it up later ...thanks

**nail man** · July 5th, 2009

Quote:

Originally Posted by jc7257

Ping your PC and see if it shows the Khub connected...

thanks jc7257...have did a ping test a few days ago & it said it was fine ....khub showed up as "devilpot..........."

hawkeyi · July 5th, 2009

Quote:

Originally Posted by nail man

thanks jc7257...i have that now & still no luck in getting this box to work ...i`ve put about 12 hours in trying to get it to say module connected ...tried everything ...i think it`s a router conflict but don`t know how to fix it , i have disabled firewall setting & even bypassed the router a few times , i`m using a " d-link " router ...thanks

The easiest thing to do is buy a switch or a hub. It is similar to a router but it doesn't have any firewalls or wireless. My favorite is the Netgear FS105 and you don't need to install any software to configure it. It works out of the box. If you are going to buy a router. Buy a Linksys, they are very customizable (ddwrt). I personally think people should stop telling people to buy routers. Unless they need wireless, it only causes people problems.

hawkeyi · July 5th, 2009

Quote:

Originally Posted by nail man

thanks jc7257...have did a ping test a few days ago & it said it was fine ....khub showed up as "devilpot..........."

Yup, that is the Khub.