problems with my 650s classic

[yanyos]

Hey !

I've already load the last code to my 650 receiver but i still see some channels only,no ppv channels etc...Its the first time that i use this receiver Its new! i hope u can help me!!! thanks!


Yanel

[painterguy14]

Welcome to aba yanyos. Post your dish setup & settings & we will get you going.

[yanyos]

Ok some of the settings are the same of my father ones a 600 premium, for example
16 echostar 7 (119)
22khz Auto
Diseq None or burst B
sw Dish 1

The problem is that i only have 26 channels is strange!!

Thanks for the help! The 650 classic is new for me!!!

[cisco123]

are you just wanting 119??


Satellite 110 - Echostar 8,10 or (6,8)

LNB power----------- on
LNB Type------------ ocs-dp
LNB Freq------------- 11250
Transponder--------- 12224
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 2
Motor--------------- off
Legacy switch------- off

Satellite 119 - Echostar 7

LNB power----------- on
LNB Type-----------ocs-dp
LNB Freq------------- 11250
Transponder--------- 12239
22KHz--------------- Off
Search Option-------- all
Network search------ on
DiseqC-------------- Port 1
Motor--------------- off
Legacy switch------- off

If sat # does not show up in upper wright hand corner check your settings then adjust if needed

[bigevil69]

what kind of set up do you have ---meaning are you connected to the same dish as your father oryour own dish
how do you have it connected
are you just trying to get 1 sat or both

[yanyos]

both sat.... from the same lnb are two antennas!!!

[bigevil69]

look at this thread and see if you can find the picture of your lnb and tell us what kind

http://www.abadss.com/forum/29-fta-a...ollection.html

[yanyos]

Dual dss lnb (ccs2500)

[bigevil69]

how many channels do you get on the cw600

[yanyos]

Another think im from Puerto Rico....maybe its important u to know that too!!

[yanyos]

a lot of channels from both sat

[bigevil69]

do you have a way of taking a pic of your sat and lnb and email to me
i'm confused because the lnb you listed is for 1 sat and 2 receivers but you said you get channels from both sats on the cw
or are there more than 1 lnb on the dish

[yanyos]

Are two Antenas and Two LNBs

[yanyos]

The process of the searching channels its very fast too...its not suppossed to be that fast, its not finding many channels

[bigevil69]

do a factory default
go into antenna settings and set them up like this

EchoStar 7 119.0W
LNB Power ON
LNB Type STANDARD
LNB Freq. 11250
22KHz OFF
TP Freq. 12239
Diseqc 1.0 PORT 1
Motor OFF
legacy sw sw21

EchoStar 6,8 110W
LNB Power ON
LNB Type STANDARD
LNB Freq. 11250
22KHz OFF
TP Freq. 12224
Diseqc 1.0 PORT 2
Motor OFF
legacysw SW21

[yanyos]

ok i did that , under de search progress page it saids for 110 32-32, for 119 29/29 and its finish on that!!!

[bigevil69]

did you do blind scan or channel scan
also what are your signal and quality meters read

[yanyos]

A channel scan with the red button!! The signal is good in the 110 !!!! i the 119 its really only 42%.

[bigevil69]

on the antenna setting page when you have it set to 119 does echo 119w show up at bottom just above signal meter

[boyusa]

where i can get winzip files can you help please.