Help please grasshopper

[gkopytko]

Is it possible that 2 disq switch's close together on side of house is effecting my signal and picture? i use to have viewsat plat on oval dish and got 110 and 119 perfect, about 2 months ago i added sonicview hd 8000 to house and put up 18 in dish for sat 82, that works perfect, i then ran sep cables from lnb's into 2 sep disq switchs and into house, on sonicview i could get everything, but on viewsat i could never get 119? would always jsut say 110 sat. now my sonicview is playing tricks, i lose 119 and 110 altogether and i turned off reciever on back for 10 minutes put back on and i get 110 only. but signal is 100 % for 110 and 0 for 119, ? just tryin to understand why i cant get all 3 sats on both recievers. general question, thanks

[cdo_care]

Originally Posted by gkopytko

Is it possible that 2 disq switch's close together on side of house is effecting my signal and picture? i use to have viewsat plat on oval dish and got 110 and 119 perfect, about 2 months ago i added sonicview hd 8000 to house and put up 18 in dish for sat 82, that works perfect, i then ran sep cables from lnb's into 2 sep disq switchs and into house, on sonicview i could get everything, but on viewsat i could never get 119? would always jsut say 110 sat. now my sonicview is playing tricks, i lose 119 and 110 altogether and i turned off reciever on back for 10 minutes put back on and i get 110 only. but signal is 100 % for 110 and 0 for 119, ? just tryin to understand why i cant get all 3 sats on both recievers. general question, thanks

I have an answer for this Problem. but we will wait to grasshopper to answer this.

[arboristman]

buddy GH is not online right now,but i can give you a hand.
this is common when using 2 diseqc's with dual lnbs.look here for solutions:

http://www.abadss.com/forum/29-lnb-d...receivers.html

[gkopytko]

thanks eveyone

[cdo_care]

Originally Posted by gkopytko

Is it possible that 2 disq switch's close together on side of house is effecting my signal and picture? i use to have viewsat plat on oval dish and got 110 and 119 perfect, about 2 months ago i added sonicview hd 8000 to house and put up 18 in dish for sat 82, that works perfect, i then ran sep cables from lnb's into 2 sep disq switchs and into house, on sonicview i could get everything, but on viewsat i could never get 119? would always jsut say 110 sat. now my sonicview is playing tricks, i lose 119 and 110 altogether and i turned off reciever on back for 10 minutes put back on and i get 110 only. but signal is 100 % for 110 and 0 for 119, ? just tryin to understand why i cant get all 3 sats on both recievers. general question, thanks

You know buddy, If your 3LNB is dish pro. Better to use a dp34 sw. 3sat and receivers.3X4. This is no headache..