Dish Motors/fortec Dish

[clarencegriffit]

LOOKING TO BUY A FORTEC DISH AND A PANSTAT MOTOR JUST WONDERING WHAT PEOPLE HAVE TO SAY ABOUT THESE ITEMS USEING A CAPTIVEWORKS CW 800S PVR RECEIVER DISH IS SUPPOST TO BE A 34" LET ME KNOW WHAT YOU THINK THANKS TO YOU ALL

[sly]

Originally Posted by clarencegriffit

LOOKING TO BUY A FORTEC DISH AND A PANSTAT MOTOR JUST WONDERING WHAT PEOPLE HAVE TO SAY ABOUT THESE ITEMS USEING A CAPTIVEWORKS CW 800S PVR RECEIVER DISH IS SUPPOST TO BE A 34" LET ME KNOW WHAT YOU THINK THANKS TO YOU ALL

it will work good it just takes some time to set-up, i would read all you can find out on how to set-up the system it is not easy, but after you get your first sat the rest is somewhat easy you might have to tweek you dish alittle on the elev.. good luck on the set-up if you need some help just post someone will help. it took me a few days to set up mine but now i get 8 sats alot of fta channels. have fun

[mcdoogle]

One thing nice when it rains hard or snow hard you still get picture and sound with the larger dish, Set up is a pain, Must make sure your level and find your TURE SOUTH SAT to setup to.....

[l3v3l1]

one tip, when you figure out which is your closet sat, and are trying to lock it in make sure you are on an ACTIVE transponder. This wouldve saved me a few hours. Once you lock in on your closest sat its cake.

[captain]

Originally Posted by clarencegriffit

LOOKING TO BUY A FORTEC DISH AND A PANSTAT MOTOR JUST WONDERING WHAT PEOPLE HAVE TO SAY ABOUT THESE ITEMS USEING A CAPTIVEWORKS CW 800S PVR RECEIVER DISH IS SUPPOST TO BE A 34" LET ME KNOW WHAT YOU THINK THANKS TO YOU ALL

!st need to lose the caps. but the pansat motor 1 of my favorites very good an has metal gears been using 1 here fer 2yrs an no problem running a 1 meter eagle dish, but the fotec not 1 of my favorites mainly due the gain factor a channel master will blow it away size for size. but you will pay a lot more for 1, an think about going into a 90cm or 1meter if you plan to do any leinar satellites, or if you are on the outher edges of the US, like Ma,Fl,Ca,or Wa. So happy Hollidays Captain

[nsatguy]

Looking at a package rite now... Wineguard 33" with SG2100 Motor and Invacom Quad LNB. Is this a good combo? Linear & Circular?

[clarencegriffit]

O.k. Guys Done It Bought A 34" Fortec Dish And A Pansat Motor Assemblyshiped For 140 Hope I Get Everything I Need For This Setup Will Be Looking For Advise On How To Setup System As Soon As I Get It,(beware) Will Start Reading Again Iguess I'll Be Contacting You All Later For Asistance Lol. Semper Fi To All And Thank You For Your Input

[clarencegriffit]

Satmart Has The Lowest Price I've Found On The Invacom Lnb That I've Seen About 54 To 55 Usd Listed As Mx Mart On Ebay I Think Lowest Price On A Dish Was On World Wide Satelite Web Page They Have Fortec Digiwave And Channel Master Check Them Out Have A Good Price On Motors Too.