why the active channels working list shows a few hd locals in fla and texas I have rescanned and rescanned but cannot get this to download they are supposed to be on 110 but do not come in on it I really want a couple of these cities when they get a hold on locals. These locals are also located on sat 61.5 if i allocate a dish for this sat do you guys think I will get them since I can not get them on the 110 as listed. Thanks

a new 8psk card I will need yet another one lol and not the incrediblefta site nothing but problems from them no help so any suggestions guys prefer to be in the states though thanks

I'm running an Nfusion HD and the working channels list on google is showing the VOD's on 5816 - 5825 are UP. I'm running the latest software (r25) and i've scanned/re-scanned but they never show up in the guide.

Any tricks to get them in the clear?
Thanks

I installed the board that came with the HD and got no signal. Tried everything. I finally decided to test with it out. Voila! We still had some issues but with help from the awesome folks here we worked them all out!

So then I got brave and decided to put it back in. Followed instructions again with jumper to IF out. Instant nothing! Poof, all gone, no signal. Checked all settings, nothing changed. Had IP, could see the box in ie, but no tv. In frustration I pulled the board, and guess what? Everything worked again, except HD of course...

So I've been reading lots of posts here trying to find the answer with no luck so far. I have learned that I probably need to set up each tp for hd, if I could get that far, but without any signal at all with 8psk in, I'm not sure where to start???

Planning on buying an hd nfusion. Is there a channel list of HD channels that I can look at. I really only watch HD. My SV8000 is just to frustrating.
THNX

Hi guys,does the nf hd has the automatic tp update option,if yes where can i find it on the menue thanks

I"m struggling with the PVR feature. Out of five attempts, I was only able to get a scheduled record to happen once.

This is what I'm doing.
1. I go to guide.
2. I scroll to the program that I want to record.
3. I press the "A" button to add it to the wish list.
4. I press exit.
5. I press the "clock" button to see if it was added to the wish list.
6. I press exit.
7. I leave the receiver on and turn off the TV and go to bed.
8. I wake up in the morning and its usually not there.

I don't have a problem recording something that is currently broadcasting. I'm using a thumb drive and I have the receiver set to recognize the front usb port.

Another issue I have is the back USB port. I can't seem to plug anything into it with the 8PSK plugged in (too crowded with wires).

Any help would be appreciated. I hear the PVR feature is kinda flakey.

There is any ch or there is a way to get DD audio signal from my nfusion receiver?? I am using hdmi but there is not dobly digital audio signal in any ch

just a question have 119 and 110 locked in and i want to add 129 for hd channels on my nfusion hd
i have a 24x18 dish that i use for 119 / 110 91 / 82 with 2 channel master switces and 2 diseqc 129 dish set up
i was going to aim for dishnet with with 24x18 dishwith 3 standard dual lnb
and set up 18 oval for bev sats 91 / 82
would there be any problem with this set up ?????

My terrestrial channels TV list is out of order. I'm using a outside TV antenna to pick up locaL channels 2 to 13. The service ID places the channel in the wrong order. I tried sort (green button on rtemote) and changed it to (a to Z) green button on remote and they are now in order but if I go to something else like games and then come back to terrestrial its out of order again. How can I get these channels in order ??????

Got a friend that has this model, as I am use to the cw700 and really dont know about this model. What will I have to buy seperatly for this unit to watch tv? I use a router to use this laptop can I use the same one while I am useing the Laptop or will I have to purchase other stuff too? Please advise me what exactly all that I will need to get....

I have video (very strong signal) but no audio on channel 7 from the atsc tuner using an VHF, UHF outside local tv Antenna . Is there a fix for this ?
Also when I do a channel sort for the atsc tuner using a VHF, UHF outside Antenna it will not hold its momery. Can this Unit memorize the channel sorting order ? Do I have to move and edit all the channels in order ? If so how do I move the channels and sort them in order, for example; channel 2,3,4,5,6,7,8,9,10,11 etc..... ?

Anyone missing channel 109 ? Or if anyone getting channel 109 ? I jummped from channel 108 to 110. This happen when I done a factory reset. Did have the channel 109 before the factory reset I done. My box software is boot version is 01.05 and s/w version is v1.3sR 25 F. Is there a fix ????

Found most of my info for the HD unit setup, but I'm not sure on what sats I need to pick up for HD. Read a lot of differnt answers. For the Phoenix I have 3 single round dish's for 110 119 82. Plan on keeping the Phoenix setup. What do I need to get dish wise for the HD setup and what sats? . What would be the ideal dish setup for HD on the eastern coast?

Thanks in advance!

Most of our channels are completly dark, some have sound, some have sound and picture. It says that the SUNS are disconnected. I have seen a bunch of threads on the "suns disconnected" thing but after a few days of trying I thought I would look for more help.